U1512 GMC Code - Headlamp Control Module/Headlamp Leveling Control Module Lost Communication With Right Headlamp On LIN Bus
|U1512 GMC code possible causes
- Faulty Right Headlamp
- Right Headlamp harness is open or shorted
- Right Headlamp circuit poor electrical connection
- Faulty Headlamp Control Module/Headlamp Leveling Control Module
|How do I fix the U1512 GMC code?Check the "Possible Causes" listed above. Visually inspect the related wiring harness and connectors. Check for damaged components and look for broken, bent, pushed out, or corroded connector's pins.
|Cost of diagnosing the U1512 GMC code
Labor: 1.0The cost of diagnosing the U1512 GMC code is 1.0 hour of labor. The auto repair's diagnosis time and labor rates vary by location, vehicle's make and model, and even your engine type. Most auto repair shops charge between $75 and $150 per hour.
|What are U1512 GMC code possible symptoms?
- Engine Light ON (or Service Engine Soon Warning Light)
|U1512 GMC code descriptionThe Local Interconnect Network (LIN) Bus consists of a single wire with a transmission rate of 10.417 Kbit/s. The serial data is transmitted over a LIN circuit between a master control module and other LIN devices within a particular subsystem. If serial data communication is lost between any of the LIN devices on the LIN bus network, the master control module will set a no communication code against the non-communicating LIN device. The Diagnostic Trouble Code (DTC) will set when a supervised periodic message to Headlamp Control Module/Headlamp Leveling Control Module from Right Headlamp has not been received.
|Need more information with the U1512 GMC code?Need more information on how to fix the U1512 GMC code? Get Access to Factory Service Manuals
|Need help with a U1512 GMC code?Get the U1512 Gmc code diagnosed by a professional: Find a repair shop in your area
|U1512 GMC code commentsHelp us improve AutoCodes.com. Leave a comment below or tell us if the information above helps you fix the code. What are the symptoms on your vehicle for the U1512 Gmc code? Have you replaced any parts?
Any information is appreciated. Thanks