U147D Jeep Code - Implausible Data Received From Right Blind Spot Sensor
Quick Answer
The Blind Spot Monitor (BSM) system has two primary components; a Left Blind Spot Sensor (LBSS) and Right Blind Spot Sensor (RBSS). Common causes include Faulty Right Blind Spot Sensor (RBSS), Right Blind Spot Sensor harness is open or shorted, Right Blind Spot Sensor circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- U147D Jeep indicates Implausible Data Received From Right Blind Spot Sensor.
- Common causes
- Common causes include Faulty Right Blind Spot Sensor (RBSS), Right Blind Spot Sensor harness is open or shorted, Right Blind Spot Sensor circuit poor electrical connection.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code U147D Jeep Description
The microprocessor analyzes the sensor data to determine whether any detected objects should be reported. When it is determined that an object should be reported, the Sensor controls its respective left or right BSM display directly through a hard-wired output to the Outside Rearview Mirrors. The sensor also sends an electronic request message over the CAN Bus to the radio. The Radio then mutes any current output through the speakers and generates a chime as an audible alert.
Each sensor performs a bulb test by illuminating the triangle icon in the Outside Rearview Mirror at each ignition ON cycle.
The Diagnostic Trouble Code (DTC) will set if incorrect data received from the Right Blind Spot Sensor (RBSS).
What are the Possible Causes of the DTC U147D Jeep?
- Faulty Right Blind Spot Sensor (RBSS)
- Right Blind Spot Sensor harness is open or shorted
- Right Blind Spot Sensor circuit poor electrical connection
How to Fix the DTC U147D Jeep?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the U147D Jeep code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the U147D Jeep code?
Need more information on how to fix the U147D Jeep code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the U147D Jeep code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about U147D Jeep Code
1. What are the common symptoms of OBDII code U147D in a Jeep related to the right blind spot sensor?
- Common symptoms include the malfunction indicator light (MIL) illuminating, loss of blind spot monitoring functionality, and potential error messages on the dashboard.
2. What could cause the OBDII code U147D, indicating implausible data received from the right blind spot sensor in a Jeep?
- Causes may include a faulty right blind spot sensor, damaged wiring or connectors, software issues, or environmental factors affecting sensor performance.
3. How can I diagnose the cause of the U147D code related to the right blind spot sensor in my Jeep?
- Diagnose the issue by conducting a visual inspection of the sensor and its connections, checking for any visible damage, using a diagnostic scan tool to retrieve freeze frame data, and performing circuit testing if needed.
4. Are there any DIY repair tips for fixing the U147D code in a Jeep due to the right blind spot sensor issue?
- DIY repair tips include ensuring the sensor is clean and free from obstructions, checking and repairing any damaged wiring or connectors, and performing a sensor reset or calibration if applicable.
5. Can environmental factors like extreme weather conditions trigger the U147D code in a Jeep's right blind spot sensor?
- Yes, extreme weather conditions such as heavy rain, snow, or extreme temperatures can affect the performance of the sensor and potentially trigger the U147D code.
6. Is it safe to continue driving my Jeep with the U147D code related to the right blind spot sensor issue?
- While the vehicle should remain operational, it is advisable to address the issue promptly to ensure the proper functioning of the blind spot monitoring system for enhanced safety.
7. How much does it typically cost to repair the U147D code related to the right blind spot sensor in a Jeep?
- Repair costs can vary depending on the root cause of the issue, but they may range from a few hundred to over a thousand dollars, including parts and labor.
8. Can resetting the vehicle's computer system help clear the U147D code associated with the right blind spot sensor problem?
- Resetting the computer system may temporarily clear the code, but it is essential to address the underlying issue causing the fault code to prevent it from reoccurring.
9. Will the U147D code related to the right blind spot sensor problem affect the overall performance of my Jeep?
- While the code may not directly affect the engine performance, it can impact the functionality of the blind spot monitoring system, compromising safety features.
10. Can a mechanic specializing in automotive electronics diagnose and repair the U147D code in a Jeep related to the right blind spot sensor?
- Yes, a qualified mechanic with expertise in automotive electronics can diagnose the issue accurately using specialized tools and repair the right blind spot sensor system to resolve the U147D code.
Discuss the causes and fixes for U147D Jeep OBDII Code
Code U147D Jeep comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
