U147D Dodge Code - Implausible Data Received From Right Blind Spot Sensor
Quick Answer
The Blind Spot Monitor (BSM) system has two primary components; a Left Blind Spot Sensor (LBSS) and Right Blind Spot Sensor (RBSS). Common causes include Faulty Right Blind Spot Sensor (RBSS), Right Blind Spot Sensor harness is open or shorted, Right Blind Spot Sensor circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- U147D Dodge indicates Implausible Data Received From Right Blind Spot Sensor.
- Common causes
- Common causes include Faulty Right Blind Spot Sensor (RBSS), Right Blind Spot Sensor harness is open or shorted, Right Blind Spot Sensor circuit poor electrical connection.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code U147D Dodge Description
The microprocessor analyzes the sensor data to determine whether any detected objects should be reported. When it is determined that an object should be reported, the Sensor controls its respective left or right BSM display directly through a hard-wired output to the Outside Rearview Mirrors. The sensor also sends an electronic request message over the CAN Bus to the radio. The Radio then mutes any current output through the speakers and generates a chime as an audible alert.
Each sensor performs a bulb test by illuminating the triangle icon in the Outside Rearview Mirror at each ignition ON cycle.
The Diagnostic Trouble Code (DTC) will set if incorrect data received from the Right Blind Spot Sensor (RBSS).
What are the Possible Causes of the DTC U147D Dodge?
- Faulty Right Blind Spot Sensor (RBSS)
- Right Blind Spot Sensor harness is open or shorted
- Right Blind Spot Sensor circuit poor electrical connection
How to Fix the DTC U147D Dodge?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the U147D Dodge code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the U147D Dodge code?
Need more information on how to fix the U147D Dodge code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the U147D Dodge code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about U147D Dodge Code
1. What are the common symptoms of OBDII code U147D in a Dodge related to the right blind spot sensor?
The common symptoms include malfunctioning right blind spot detection, inaccurate alerts, or complete failure of the system.
2. What can cause the OBDII code U147D to trigger in a Dodge?
The code U147D is triggered when the right blind spot sensor in the vehicle detects implausible data, which could result from sensor malfunction, wiring issues, or sensor calibration problems.
3. How can I diagnose the cause of OBDII code U147D related to the right blind spot sensor in my Dodge?
A thorough diagnostic process involving checking the sensor connections, inspecting the sensor for damage, and testing the sensor's functionality using diagnostic tools can help identify the root cause.
4. Is it safe to continue driving my Dodge with the U147D code related to the right blind spot sensor illuminated?
It is recommended to address the issue promptly, as driving with a malfunctioning blind spot sensor may compromise your safety by providing inaccurate information about surrounding vehicles.
5. Can I reset the OBDII code U147D in my Dodge related to the right blind spot sensor by disconnecting the battery?
While disconnecting the battery may clear the code temporarily, it is crucial to address the underlying issue causing the code to prevent it from reoccurring.
6. Are there any DIY repair tips for fixing the U147D code associated with the right blind spot sensor in my Dodge?
DIY repair tips may include checking and cleaning sensor connections, inspecting wiring for damage, and ensuring proper sensor alignment and calibration.
7. How much does it typically cost to repair the U147D code related to the right blind spot sensor in a Dodge?
The cost of repair can vary based on the specific issue causing the code, but it may involve expenses related to sensor replacement, wiring repairs, or professional diagnostic services.
8. Can extreme weather conditions affect the functioning of the right blind spot sensor and trigger the U147D code in a Dodge?
Yes, extreme weather conditions such as heavy rain, snow, or extreme temperatures can impact the performance of the sensor and potentially trigger the U147D code.
9. Is the U147D OBDII code related to the right blind spot sensor a common issue in Dodge vehicles?
While not extremely common, issues with blind spot sensors triggering the U147D code can occur in Dodge vehicles, especially in models equipped with advanced safety systems.
10. How can I prevent the U147D code related to the right blind spot sensor from occurring in my Dodge in the future?
Regular maintenance checks, keeping the sensors clean and free from obstructions, and addressing any issues promptly can help prevent the recurrence of the U147D code in your Dodge.
Discuss the causes and fixes for U147D Dodge OBDII Code
Code U147D Dodge comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
