U1469 Chrysler Code - Implausible Gear Shift Position Signal Sent DPT CAN-CAN
Quick Answer
The purpose of the diagnostic is to monitor the Controller Area Network (CAN) BUS, the transmitted messages on the CAN BUS and the validity of the CAN signals. Common causes include Faulty Electronic Shift Module (ESM), Electronic Shift Module (ESM) harness is open or shorted, Electronic Shift Module (ESM) circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- U1469 Chrysler indicates Implausible Gear Shift Position Signal Sent DPT CAN-CAN.
- Common causes
- Common causes include Faulty Electronic Shift Module (ESM), Electronic Shift Module (ESM) harness is open or shorted, Electronic Shift Module (ESM) circuit poor electrical connection.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code U1469 Chrysler Description
What are the Possible Causes of the DTC U1469 Chrysler?
- Faulty Electronic Shift Module (ESM)
- Electronic Shift Module (ESM) harness is open or shorted
- Electronic Shift Module (ESM) circuit poor electrical connection
- Faulty Transmission Control Module (TCM)
How to Fix the DTC U1469 Chrysler?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the U1469 Chrysler code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the U1469 Chrysler code?
Need more information on how to fix the U1469 Chrysler code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the U1469 Chrysler code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about U1469 Chrysler Code
1. What are the common symptoms of OBDII code U1469 in a Chrysler vehicle?
- Common symptoms include issues with gear shifting, incorrect gear display on the dashboard, and potential transmission performance issues.
2. What could cause the OBDII code U1469 to trigger in a Chrysler vehicle?
- The code U1469 is usually triggered due to a faulty gear shift position sensor, wiring issues, or problems with the DPT CAN-CAN communication network.
3. How can I diagnose the cause of OBDII code U1469 in my Chrysler vehicle?
- A thorough inspection of the gear shift position sensor, checking for wiring damage, and conducting a diagnostic scan for the CAN-CAN communication network can help identify the root cause.
4. Can driving with OBDII code U1469 pose any risks to my Chrysler vehicle?
- Driving with this code may result in incorrect gear shifting, potential transmission damage, and reduced overall vehicle performance. It is advisable to address the issue promptly.
5. Is it safe to continue driving my Chrysler vehicle with the Implausible Gear Shift Position Signal error?
- It is not recommended to drive the vehicle with this error, as it can lead to unsafe driving conditions, potential transmission issues, and further damage to the vehicle.
6. How can I repair the Implausible Gear Shift Position Signal error in my Chrysler?
- Repairing this error may involve replacing the faulty gear shift position sensor, repairing damaged wiring, or addressing issues within the DPT CAN-CAN communication network.
7. Can I reset the OBDII code U1469 in my Chrysler without fixing the underlying issue?
- While you can clear the code temporarily, it is crucial to address the root cause of the error to prevent it from reoccurring and potentially causing further damage to the vehicle.
8. Are there any DIY tips for troubleshooting OBDII code U1469 in a Chrysler?
- DIY tips may include visually inspecting the gear shift position sensor and associated wiring, checking for loose connections, and ensuring proper communication within the CAN-CAN network.
9. How long does it typically take to repair the OBDII code U1469 in a Chrysler?
- The repair time can vary depending on the exact cause of the error, but it may take a few hours to a full day to diagnose, repair, and test the gear shift position sensor and related components.
10. Is it necessary to visit a dealership or mechanic for repairing the OBDII code U1469 in a Chrysler?
- While some DIY enthusiasts may attempt to fix the issue themselves, it is generally recommended to seek professional help from a dealership or qualified mechanic to accurately diagnose and repair the problem.
Discuss the causes and fixes for U1469 Chrysler OBDII Code
Code U1469 Chrysler comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
