AutoCodes – RAM – U1467 RAM

U1467 RAM Code - Implausible Driver Shift Request Signal Received On CAN And DPT CAN

Quick Answer

The purpose of the diagnostic is to check the validity of the selected driving position. Common causes include Faulty Shifter, Faulty Electronic Shift Module (ESM), Electronic Shift Module (ESM) harness is open or shorted. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means: U1467 RAM indicates Implausible Driver Shift Request Signal Received On CAN And DPT CAN.
Common causes: Common causes include Faulty Shifter, Faulty Electronic Shift Module (ESM), Electronic Shift Module (ESM) harness is open or shorted.
Severity: High - diagnose this code as soon as possible.
Can I drive?: Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

Save to My Repairs My Repairs

AI answers can be wrong. Verify repairs with testing. Open full chat

Code Popularity 6,842

How popular is this code, among other codes? Low

Repair Importance Level

Urgent (Diagnose now) (3 / 3)

Repair Difficulty Level

Advanced (Pro) (3 / 3)

What is this?

Table of contents Created and updated by William Orellana on May 25, 2020

Description
Possible Causes
How To Fix
Cost to Diagnose
FAQs
Comments
Add Comment

💬 Need more help? Ask Coddy for instant answers — it's free!

Code U1467 RAM Description

The purpose of the diagnostic is to check the validity of the selected driving position. The driving position is received from two different Controller Area Network (CAN) BUS signals. If both signals are invalid because of any of the monitored CAN failures (time-out, checksum, alive counter, signal invalid) this fault is set to indicate that the driving position can not be determined. The failure is detected by the Transmission Control Module (TCM) if the CAN monitoring detects any failure on both driving position signals of the two CAN BUS signals.

OBDII Code U1467 RAM - Implausible Driver Shift Request Signal Received On CAN And DPT CAN - AutoCodes.com — U1467 RAM Code - Implausible Driver Shift Request Signal Received On CAN And DPT CAN

What does this mean?

What are the Possible Causes of the DTC U1467 RAM?

Faulty Shifter
Faulty Electronic Shift Module (ESM)
Electronic Shift Module (ESM) harness is open or shorted
Electronic Shift Module (ESM) circuit poor electrical connection
Faulty Transmission Control Module (TCM)

How to Fix the DTC U1467 RAM?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the U1467 RAM code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the U1467 RAM code?

Need more information on how to fix the U1467 RAM code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the U1467 RAM code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about U1467 RAM Code

1. What are the common symptoms of OBDII code U1467?

- Common symptoms include erratic shifting behavior, transmission slipping, and potential difficulty engaging certain gears.

2. What can cause the OBDII code U1467 to trigger?

- The code may trigger due to wiring issues, faulty sensors, a malfunctioning transmission control module (TCM), or a problem with the CAN communication network.

3. How can I diagnose the OBDII code U1467?

- Diagnosing the code typically involves using a professional OBDII scanner to retrieve the trouble codes and performing a thorough inspection of the transmission system and related components.

4. What repairs are commonly needed for OBDII code U1467?

- Repairing this code may involve fixing wiring faults, replacing damaged sensors, resetting the TCM, or addressing any issues with the CAN communication system.

5. Can I drive my vehicle with the OBDII code U1467 present?

- It is not recommended to drive the vehicle with this code present, as it can lead to potential transmission issues and safety hazards.

6. How much does it cost to repair OBDII code U1467?

- Repair costs can vary depending on the underlying cause of the code, but expenses may include parts replacement, labor costs, and diagnostic fees.

7. Is it possible to reset the OBDII code U1467 without repairs?

- While clearing the code may temporarily resolve the issue, it is crucial to address the root cause to prevent further transmission problems.

8. Can a DIY enthusiast fix OBDII code U1467 at home?

- Depending on the mechanical skill level and access to tools, some DIY enthusiasts may be able to diagnose and repair minor issues related to this code. However, complex repairs may require professional assistance.

9. Will OBDII code U1467 cause permanent damage to the vehicle if left unattended?

- Ignoring this code can potentially lead to further damage to the transmission system and other related components, so it is essential to address it promptly.

10. How long does it take to repair OBDII code U1467?

- The repair time can vary based on the specific cause of the code and the complexity of the necessary repairs, so it is recommended to consult with a professional technician for an accurate estimate.