AutoCodes – Chrysler – U1467 Chrysler

U1467 Chrysler Code - Implausible Driver Shift Request Signal Received On CAN And DPT CAN

Quick Answer

The purpose of the diagnostic is to check the validity of the selected driving position. Common causes include Faulty Shifter, Faulty Electronic Shift Module (ESM), Electronic Shift Module (ESM) harness is open or shorted. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means: U1467 Chrysler indicates Implausible Driver Shift Request Signal Received On CAN And DPT CAN.
Common causes: Common causes include Faulty Shifter, Faulty Electronic Shift Module (ESM), Electronic Shift Module (ESM) harness is open or shorted.
Severity: High - diagnose this code as soon as possible.
Can I drive?: Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

Save to My Repairs My Repairs

AI answers can be wrong. Verify repairs with testing. Open full chat

Code Popularity 4,051

How popular is this code, among other codes? Low

Repair Importance Level

Urgent (Diagnose now) (3 / 3)

Repair Difficulty Level

Advanced (Pro) (3 / 3)

What is this?

Table of contents Created and updated by William Orellana on May 25, 2020

Description
Possible Causes
How To Fix
Cost to Diagnose
FAQs
Comments
Add Comment

💬 Need more help? Ask Coddy for instant answers — it's free!

Code U1467 Chrysler Description

The purpose of the diagnostic is to check the validity of the selected driving position. The driving position is received from two different Controller Area Network (CAN) BUS signals. If both signals are invalid because of any of the monitored CAN failures (time-out, checksum, alive counter, signal invalid) this fault is set to indicate that the driving position can not be determined. The failure is detected by the Transmission Control Module (TCM) if the CAN monitoring detects any failure on both driving position signals of the two CAN BUS signals.

OBDII Code U1467 Chrysler - Implausible Driver Shift Request Signal Received On CAN And DPT CAN - AutoCodes.com — U1467 Chrysler Code - Implausible Driver Shift Request Signal Received On CAN And DPT CAN

What does this mean?

What are the Possible Causes of the DTC U1467 Chrysler?

Faulty Shifter
Faulty Electronic Shift Module (ESM)
Electronic Shift Module (ESM) harness is open or shorted
Electronic Shift Module (ESM) circuit poor electrical connection
Faulty Transmission Control Module (TCM)

How to Fix the DTC U1467 Chrysler?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the U1467 Chrysler code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the U1467 Chrysler code?

Need more information on how to fix the U1467 Chrysler code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the U1467 Chrysler code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about U1467 Chrysler Code

1. What are the common symptoms of OBDII code U1467 on a Chrysler vehicle?

- Some common symptoms include erratic shifting behavior, transmission slipping, and the inability to shift gears properly.

2. What can cause the U1467 code to trigger on a Chrysler vehicle?

- The U1467 code is triggered when the Engine Control Module (ECM) detects an implausible driver shift request signal received on the Controller Area Network (CAN) and the Diagnostic Powertrain (DPT) CAN.

3. How serious is the U1467 code on a Chrysler vehicle?

- The U1467 code can affect the drivability and safety of the vehicle, so it is important to address it promptly to prevent further damage or unsafe driving conditions.

4. What are some possible repair tips for resolving the U1467 code on a Chrysler vehicle?

- Some repair tips include checking and repairing any damaged wiring or connectors in the CAN network, ensuring proper communication between modules, and reprogramming or replacing the ECM if necessary.

5. Can I drive my Chrysler vehicle with the U1467 code present?

- It is not recommended to drive the vehicle with the U1467 code present, as it can lead to transmission issues that may cause further damage or safety risks.

6. How much does it typically cost to repair the U1467 code on a Chrysler vehicle?

- The cost of repairing the U1467 code can vary depending on the underlying cause and the extent of the repair needed. It is advisable to consult with a professional mechanic for an accurate estimate.

7. Can the U1467 code be cleared/reset without fixing the underlying issue on a Chrysler vehicle?

- Clearing or resetting the code without addressing the underlying issue may temporarily turn off the check engine light, but the problem will likely reoccur until properly repaired.

8. What happens if the U1467 code is ignored on a Chrysler vehicle?

- Ignoring the U1467 code can lead to transmission problems, poor performance, and potential safety hazards while driving the vehicle.

9. Is the U1467 code specific to Chrysler vehicles only?

- The U1467 code is specific to Chrysler vehicles and may not be applicable to other vehicle makes and models.

10. Can a DIY enthusiast fix the U1467 code issue on a Chrysler vehicle?

- While some basic troubleshooting steps can be performed by a DIY enthusiast, diagnosing and repairing the U1467 code may require specialized tools and expertise best handled by a professional mechanic.