U1465 Chrysler Code - Implausible Driver Shift Request Signal Received
Quick Answer
The purpose of the diagnostic is to monitor the Controller Area Network (CAN) BUS, the transmitted messages on the CAN BUS and the validity of the CAN signals. Common causes include Faulty Electronic Shift Module (ESM), Electronic Shift Module (ESM) harness is open or shorted, Electronic Shift Module (ESM) circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- U1465 Chrysler indicates Implausible Driver Shift Request Signal Received.
- Common causes
- Common causes include Faulty Electronic Shift Module (ESM), Electronic Shift Module (ESM) harness is open or shorted, Electronic Shift Module (ESM) circuit poor electrical connection.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code U1465 Chrysler Description
What are the Possible Causes of the DTC U1465 Chrysler?
- Faulty Electronic Shift Module (ESM)
- Electronic Shift Module (ESM) harness is open or shorted
- Electronic Shift Module (ESM) circuit poor electrical connection
- Faulty Transmission Control Module (TCM)
How to Fix the DTC U1465 Chrysler?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the U1465 Chrysler code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the U1465 Chrysler code?
Need more information on how to fix the U1465 Chrysler code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the U1465 Chrysler code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about U1465 Chrysler Code
1. What are the common symptoms of OBDII code U1465 in a Chrysler vehicle?
- Common symptoms include issues with shifting gears, transmission problems, and the vehicle not responding correctly to driver input.
2. What does the OBDII code U1465 "Implausible Driver Shift Request Signal Received" mean in a Chrysler?
- This code indicates that the vehicle's onboard computer has detected an implausible signal related to the driver's shift requests.
3. What are the possible causes of OBDII code U1465 in a Chrysler?
- Possible causes include a faulty transmission control module (TCM), wiring issues, a defective shifter assembly, or a communication error between control modules.
4. How can I diagnose the OBDII code U1465 in my Chrysler?
- Diagnosing this code typically involves checking the TCM for fault codes, inspecting the wiring and connectors related to the shifter assembly, and performing a communication system scan.
5. Can I continue driving my Chrysler with the U1465 fault code?
- It is not recommended to continue driving the vehicle with this fault code as it can lead to potential safety hazards and further damage to the transmission system.
6. How can I repair OBDII code U1465 in my Chrysler?
- Repairing this code usually involves addressing the root cause, such as replacing a faulty TCM, repairing damaged wiring, or recalibrating the shifter assembly.
7. Is it possible to reset the U1465 fault code in a Chrysler without fixing the underlying issue?
- While clearing the fault code may temporarily turn off the warning light, it is crucial to address the underlying problem to prevent the code from reoccurring.
8. How much does it cost to fix the U1465 fault code in a Chrysler?
- The cost of fixing this fault code can vary depending on the specific repair needed, such as replacing a TCM, repairing wiring, or recalibrating components. It is advisable to consult a professional for an accurate cost estimate.
9. Can a DIY enthusiast fix the U1465 fault code in a Chrysler?
- While some basic troubleshooting steps can be performed by DIY enthusiasts, diagnosing and repairing complex transmission-related issues like the U1465 code may require specialized tools and expertise best handled by a professional mechanic.
10. Is the U1465 fault code specific to Chrysler vehicles only?
- The U1465 fault code is specific to Chrysler vehicles and may not be applicable to other car makes and models.
Discuss the causes and fixes for U1465 Chrysler OBDII Code
Code U1465 Chrysler comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
