AutoCodes – Jeep – U1454 Jeep

U1454 Jeep Code - Implausible Data Received From The Gated Park Switch

Quick Answer

When the Radio Frequency Hub (RF Hub) is awake, it sends a 12-volt reference signal on the Transmission (TRS) Park Signal circuit. Common causes include Faulty Gated Park Switch, Gated Park Switch harness is open or shorted, Gated Park Switch circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means
U1454 Jeep indicates Implausible Data Received From The Gated Park Switch.
Common causes
Common causes include Faulty Gated Park Switch, Gated Park Switch harness is open or shorted, Gated Park Switch circuit poor electrical connection.
Severity
High - diagnose this code as soon as possible.
Can I drive?
Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
AI answers can be wrong. Verify repairs with testing. Open full chat
Code Popularity 1,572
How popular is this code, among other codes? Low
Table of contents Created and updated by William Orellana on May 24, 2020
πŸ’¬ Need more help? Ask Coddy for instant answers β€” it's free!

Code U1454 Jeep Description

When the Radio Frequency Hub (RF Hub) is awake, it sends a 12-volt reference signal on the Transmission (TRS) Park Signal circuit. When that circuit is grounded or ungrounded by the shifter, transmission module, or brake shift interlock solenoid (depending on the model) the RF-Hub broadcasts the hard wired park position message on the Controller Area Network (CAN) Bus. This Diagnostic Trouble Code (DTC) will set when the vehicle speed received over the CAN Bus indicates that the vehicle is moving but the hardware gated park input indicates that the vehicle is in park.
OBDII Code U1454 Jeep - Implausible Data Received From The Gated Park Switch - AutoCodes.com
U1454 Jeep Code - Implausible Data Received From The Gated Park Switch

What are the Possible Causes of the DTC U1454 Jeep?

  • Faulty Gated Park Switch
  • Gated Park Switch harness is open or shorted
  • Gated Park Switch circuit poor electrical connection
  • Faulty Shifter Component
  • Faulty Radio Frequency Hub (RF Hub)

How to Fix the DTC U1454 Jeep?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the U1454 Jeep code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the U1454 Jeep code?

Need more information on how to fix the U1454 Jeep code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the U1454 Jeep code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about U1454 Jeep Code

What does the OBDII code U1454 mean on a Jeep?

The U1454 code indicates "Implausible Data Received From The Gated Park Switch," meaning the vehicle's system is receiving inconsistent or invalid data from the gated park switch.

What are common symptoms of the U1454 code on a Jeep?

Common symptoms include difficulty shifting out of park, the transmission not engaging properly, or the check engine light illuminating.

What causes the U1454 code to appear on a Jeep?

The main causes include a faulty gated park switch, wiring or connector issues, or a malfunction in the transmission control module (TCM).

How do I diagnose the U1454 code on my Jeep?

Diagnosis involves checking the gated park switch for proper operation, inspecting wiring and connectors for damage or corrosion, and using a scan tool to verify live data and stored codes.

Can a faulty gated park switch cause the Jeep to not start?

Yes, a malfunctioning gated park switch can prevent the vehicle from starting if it fails to communicate the proper gear position to the system.

Is the U1454 code specific to Jeeps?

While U1454 is most commonly associated with Jeeps, similar codes may appear on other vehicles with gated park switches, although the specifics may vary.

How can I fix the U1454 code on my Jeep?

Repairs may include replacing the gated park switch, repairing or replacing damaged wiring or connectors, or reprogramming the TCM if necessary.

Can I drive my Jeep with the U1454 code?

Driving with the U1454 code is not recommended as it may lead to shifting issues or the inability to shift out of park, which can be unsafe.

How much does it cost to repair the U1454 code on a Jeep?

Repair costs vary but typically range from $150 to $500, depending on whether the gated park switch, wiring, or TCM needs servicing.

Does clearing the code fix the U1454 issue?

Clearing the code may temporarily reset the system, but the underlying issue must be resolved to prevent the code from returning.

Discuss the causes and fixes for U1454 Jeep OBDII Code

Code U1454 Jeep comments

No comments found for this page.

AutoCodes App

Fix Your Car Smarter

Try the New AutoCodes App!

Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.

AutoCodes App on Google Play