U1447 Jeep Code - Implausible Data Received From Steering Column Module
Quick Answer
The Diagnostic Trouble Code (DTC) sets when an error message has been received over the Controller Area Network (CAN) C bus from the Steering Column Control Module (SCCM). Common causes include Faulty Steering Column Control Module (SCCM), Steering Column Control Module harness is open or shorted, Steering Column Control Module circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- U1447 Jeep indicates Implausible Data Received From Steering Column Module.
- Common causes
- Common causes include Faulty Steering Column Control Module (SCCM), Steering Column Control Module harness is open or shorted, Steering Column Control Module circuit poor electrical connection.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code U1447 Jeep Description
What are the Possible Causes of the DTC U1447 Jeep?
- Faulty Steering Column Control Module (SCCM)
- Steering Column Control Module harness is open or shorted
- Steering Column Control Module circuit poor electrical connection
- Faulty Electronic Power Steering (EPS) Module
How to Fix the DTC U1447 Jeep?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the U1447 Jeep code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the U1447 Jeep code?
Need more information on how to fix the U1447 Jeep code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the U1447 Jeep code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about U1447 Jeep Code
1. What are the common symptoms of OBDII code U1447 in a Jeep related to implausible data received from the steering column module?
- Common symptoms include issues with the steering system, such as erratic steering behavior, inoperative power steering, and warning lights on the dashboard.
2. What are the possible causes of OBDII code U1447 in a Jeep?
- Possible causes include faulty steering angle sensor, damaged wiring or connectors in the steering column module circuit, software issues, or a malfunctioning steering column module.
3. How can I diagnose the OBDII code U1447 in my Jeep?
- Diagnosing the code typically involves using a diagnostic scanner to retrieve the code and then performing a thorough inspection of the steering column module, sensor, wiring, and related components.
4. Can I still drive my Jeep with the U1447 code present?
- It is not recommended to drive the vehicle with the U1447 code present, as it can affect the steering system's functionality and potentially compromise safety.
5. What are some repair tips for addressing the U1447 code in a Jeep?
- Repair tips may include checking and repairing any damaged wiring or connectors, recalibrating the steering angle sensor, updating software if necessary, or replacing the steering column module.
6. Is it possible to reset the U1447 code in a Jeep without fixing the underlying issue?
- While you can clear the code temporarily, it is crucial to address the underlying problem to prevent it from recurring and ensure the proper functioning of the steering system.
7. How much does it typically cost to repair the U1447 code in a Jeep?
- The cost of repairing the U1447 code can vary depending on the specific issue causing the code, the labor rates in your area, and whether any parts need to be replaced. It is advisable to consult a professional for an accurate estimate.
8. Can a DIY enthusiast fix the U1447 code issue in a Jeep?
- Depending on your skill level and access to tools, some DIY enthusiasts may be able to address simpler issues causing the U1447 code, such as checking and repairing wiring connections. However, more complex repairs may require professional assistance.
9. How long does it take to repair the U1447 code in a Jeep?
- The repair time can vary based on the underlying cause of the code and the extent of the repairs needed. Simple fixes may take a few hours, while more complex issues could require more time for diagnosis and repair.
10. Will fixing the U1447 code affect my Jeep's warranty?
- If your Jeep is still under warranty, it is advisable to consult with the dealership or authorized service center before attempting any repairs yourself. Addressing the issue in accordance with the manufacturer's specifications should not void your warranty.
Discuss the causes and fixes for U1447 Jeep OBDII Code
Code U1447 Jeep comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
