U1440 Jeep Code - Implausible/Missing Programmed Transfer Case Hi Ratio
Quick Answer
This programmed Transfer Case Hi Ratio information is received from the Totally Integrated Power Module (TIPM) to be used by the Transmission Control Module (TCM) as part of speed sensor diagnostics. Common causes include Faulty Transmission Control Module (TCM), Transmission Control Module (TCM) harness is open or shorted, Transmission Control Module (TCM) circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- U1440 Jeep indicates Implausible/Missing Programmed Transfer Case Hi Ratio.
- Common causes
- Common causes include Faulty Transmission Control Module (TCM), Transmission Control Module (TCM) harness is open or shorted, Transmission Control Module (TCM) circuit poor electrical connection.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code U1440 Jeep Description
What are the Possible Causes of the DTC U1440 Jeep?
- Faulty Transmission Control Module (TCM)
- Transmission Control Module (TCM) harness is open or shorted
- Transmission Control Module (TCM) circuit poor electrical connection
- Faulty Totally Integrated Power Module (TIPM)
How to Fix the DTC U1440 Jeep?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the U1440 Jeep code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the U1440 Jeep code?
Need more information on how to fix the U1440 Jeep code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the U1440 Jeep code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about U1440 Jeep Code
1. What are the common symptoms of OBDII code U1440 in a Jeep related to the Transfer Case Hi Ratio?
- Common symptoms include difficulty shifting gears, erratic transfer case operation, and illuminated warning lights on the dashboard.
2. What could cause the OBDII code U1440, indicating an Implausible/Missing Programmed Transfer Case Hi Ratio in a Jeep?
- Possible causes may include a malfunctioning transfer case control module, wiring issues, faulty sensors, or a problem with the transfer case itself.
3. How can I diagnose the OBDII code U1440 in my Jeep if I suspect an issue with the Transfer Case Hi Ratio?
- To diagnose this code, it is recommended to use a diagnostic scanner to read the code and perform a thorough inspection of the transfer case components, wiring, and control module.
4. Are there any DIY repair tips for addressing the OBDII code U1440 in a Jeep?
- DIY repair tips may include checking and repairing any damaged wiring, ensuring proper sensor connections, and resetting the transfer case control module after addressing the issue.
5. Can driving with the OBDII code U1440 present in a Jeep be dangerous?
- Driving with this code present can potentially cause further damage to the transfer case system and may lead to safety risks due to erratic transfer case operation.
6. How much does it typically cost to repair the OBDII code U1440 in a Jeep at a professional auto repair shop?
- The cost of repairing this code can vary depending on the exact cause of the issue, but it may range from $200 to $600 or more, including parts and labor.
7. Is it possible to reset the OBDII code U1440 in a Jeep by disconnecting the battery?
- Disconnecting the battery may clear the code temporarily, but it is not a recommended long-term solution as the underlying issue causing the code will still need to be addressed.
8. Will the OBDII code U1440 in a Jeep reset itself after the underlying issue is fixed?
- In some cases, the code may reset itself after the issue is fixed, but it is recommended to use a diagnostic scanner to clear the code manually to ensure proper operation.
9. Can extreme weather conditions impact the occurrence of the OBDII code U1440 in a Jeep?
- Extreme weather conditions such as temperature fluctuations or moisture may exacerbate existing issues related to the transfer case system and trigger the code.
10. How can regular maintenance help prevent the OBDII code U1440 from appearing in a Jeep?
- Regular maintenance, including inspecting and servicing the transfer case components, checking for wiring damage, and ensuring proper sensor function, can help prevent issues leading to this code.
Discuss the causes and fixes for U1440 Jeep OBDII Code
Code U1440 Jeep comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
