U1433 Dodge Code - Implausible Igntion Switch Status Message Received
Quick Answer
The Body Control Module (BCM) monitors the hardwired ignition switch input circuit from the Radio Frequency (RF) Hub module and compares it to the ignition switch status message received over the Controller Area Network (CAN) bus. Common causes include Faulty Body Control Module (BCM), Body Control Module (BCM) harness is open or shorted, Body Control Module (BCM) circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- U1433 Dodge indicates Implausible Igntion Switch Status Message Received.
- Common causes
- Common causes include Faulty Body Control Module (BCM), Body Control Module (BCM) harness is open or shorted, Body Control Module (BCM) circuit poor electrical connection.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code U1433 Dodge Description
What are the Possible Causes of the DTC U1433 Dodge?
- Faulty Body Control Module (BCM)
- Body Control Module (BCM) harness is open or shorted
- Body Control Module (BCM) circuit poor electrical connection
- Faulty Radio Frequency Hub (RF Hub)
How to Fix the DTC U1433 Dodge?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the U1433 Dodge code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the U1433 Dodge code?
Need more information on how to fix the U1433 Dodge code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the U1433 Dodge code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about U1433 Dodge Code
1. What are the common symptoms of OBDII code U1433 in a Dodge related to the Implausible Ignition Switch Status Message Received?
- Common symptoms include issues with starting the vehicle, intermittent stalling, and dashboard warning lights related to the ignition system.
2. What causes the OBDII code U1433 in a Dodge to trigger the Implausible Ignition Switch Status Message Received?
- This code is typically triggered by a faulty ignition switch, wiring issues, or a communication error within the vehicle's network.
3. How can I diagnose the OBDII code U1433 in my Dodge for the Implausible Ignition Switch Status Message Received?
- Diagnosing this code involves checking the ignition switch for proper operation, inspecting the wiring for any damage or corrosion, and using a diagnostic scanner to analyze the communication network.
4. Is it safe to continue driving my Dodge with the OBDII code U1433 related to the Implausible Ignition Switch Status Message Received?
- It is recommended not to drive the vehicle until the issue is resolved to avoid potential safety hazards or further damage to the vehicle's electrical system.
5. Can I repair the OBDII code U1433 in my Dodge related to the Implausible Ignition Switch Status Message Received myself?
- While some basic troubleshooting steps can be done by DIY enthusiasts, it is advisable to seek professional help for a comprehensive diagnosis and repair of this code.
6. Are there any temporary fixes or workarounds for the OBDII code U1433 in a Dodge related to the Implausible Ignition Switch Status Message Received?
- Temporary fixes like resetting the fault code may clear the warning lights temporarily, but it is essential to address the root cause of the issue for a permanent solution.
7. Will resetting the OBDII code U1433 related to the Implausible Ignition Switch Status Message Received make it go away permanently?
- Resetting the code may temporarily clear the warning lights, but if the underlying issue is not fixed, the code is likely to reappear once the problem is detected again.
8. How much does it typically cost to repair the OBDII code U1433 in a Dodge related to the Implausible Ignition Switch Status Message Received?
- The cost of repairing this code can vary depending on the exact cause of the problem, but it may involve replacement of the ignition switch, wiring repairs, or addressing communication network issues.
9. Can extreme weather conditions affect the triggering of the OBDII code U1433 in a Dodge related to the Implausible Ignition Switch Status Message Received?
- Yes, extreme temperatures or moisture can sometimes exacerbate electrical issues leading to the triggering of this code, so it's essential to keep the vehicle protected from such conditions.
10. How long does it usually take to repair the OBDII code U1433 in a Dodge related to the Implausible Ignition Switch Status Message Received?
- The repair time can vary depending on the complexity of the issue and the availability of parts, but a professional technician can typically diagnose and fix this problem within a few hours to a day.
Discuss the causes and fixes for U1433 Dodge OBDII Code
Code U1433 Dodge comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
