U1417 Jeep Code - Implausible Left Wheel Distance Signal Recieved
Quick Answer
The Powertrain Control Module (PCM) receives wheel speed and wheel distance Controller Area Network (CAN) C bus messages from the Anti-lock Brake (ABS) Module. Common causes include Faulty Vehicle Speed Sensor, Faulty Anti-lock Brake (ABS) Module, Anti-lock Brake Module harness is open or shorted. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- U1417 Jeep indicates Implausible Left Wheel Distance Signal Recieved.
- Common causes
- Common causes include Faulty Vehicle Speed Sensor, Faulty Anti-lock Brake (ABS) Module, Anti-lock Brake Module harness is open or shorted.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code U1417 Jeep Description
What are the Possible Causes of the DTC U1417 Jeep?
- Faulty Vehicle Speed Sensor
- Faulty Anti-lock Brake (ABS) Module
- Anti-lock Brake Module harness is open or shorted
- Anti-lock Brake Module circuit poor electrical connection
- Faulty Powertrain Control Module (PCM)
How to Fix the DTC U1417 Jeep?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the U1417 Jeep code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the U1417 Jeep code?
Need more information on how to fix the U1417 Jeep code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the U1417 Jeep code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about U1417 Jeep Code
1. What are the common symptoms of OBDII code U1417 in a Jeep?
- Common symptoms include the ABS light coming on, traction control system malfunctioning, and potential loss of speedometer function.
2. What causes the OBDII code U1417 in a Jeep?
- The code U1417 is typically triggered by a faulty wheel speed sensor, damaged wiring, or a failure in the ABS module.
3. How can I diagnose the source of the U1417 code in my Jeep?
- To diagnose the issue, you can use a diagnostic scanner to read the fault codes, inspect the wheel speed sensors, and check the wiring harness for any visible damage.
4. Can I still drive my Jeep with the U1417 code present?
- It is not recommended to drive the vehicle with the U1417 code as it can affect the performance of the ABS and traction control systems, leading to potential safety risks.
5. How can I repair the U1417 code in my Jeep?
- Repairing the U1417 code usually involves replacing the faulty wheel speed sensor, repairing damaged wiring, or reprogramming the ABS module if necessary.
6. Will resetting the fault codes make the U1417 code disappear permanently?
- Resetting the fault codes may temporarily clear the U1417 code, but if the underlying issue is not fixed, the code is likely to return.
7. Is it possible to fix the U1417 code in my Jeep at home, or do I need to take it to a mechanic?
- Depending on your skills and tools, you may be able to fix the U1417 code at home by replacing the wheel speed sensor or repairing the wiring. However, complex issues may require professional assistance.
8. How much does it cost to repair the U1417 code in a Jeep?
- The cost of repairing the U1417 code can vary depending on the labor rates and parts prices, but it typically ranges from $100 to $300 for parts and labor.
9. Can extreme weather conditions trigger the U1417 code in a Jeep?
- Yes, extreme weather conditions such as heavy rain, snow, or extreme temperatures can sometimes lead to sensor malfunctions triggering the U1417 code.
10. How often should I check the wheel speed sensors to prevent the U1417 code from appearing?
- It is recommended to inspect the wheel speed sensors during regular maintenance intervals or whenever you notice any symptoms of ABS or traction control issues to prevent the U1417 code from appearing.
Discuss the causes and fixes for U1417 Jeep OBDII Code
Code U1417 Jeep comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
