U140D Code - Implausible Wheel Speed Signal Received
Quick Answer
The messages sent on the Controller Area Network (CAN) bus are distinguished by an Identifier (ID). Common causes include Check for Anti-lock Brake System (ABS) Module codes, Check for Body Control Module (BCM) codes, Faulty Electronic Limited Slip Differential (ELSD) Module. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- U140D indicates Implausible Wheel Speed Signal Received.
- Common causes
- Common causes include Check for Anti-lock Brake System (ABS) Module codes, Check for Body Control Module (BCM) codes, Faulty Electronic Limited Slip Differential (ELSD) Module.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code U140D Description
What are the Possible Causes of the DTC U140D?
- Check for Anti-lock Brake System (ABS) Module codes
- Check for Body Control Module (BCM) codes
- Faulty Electronic Limited Slip Differential (ELSD) Module
- Electronic Limited Slip Differential Module harness is open or shorted
- Electronic Limited Slip Differential Module circuit poor electrical connection
How to Fix the DTC U140D?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the U140D code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the U140D code?
Need more information on how to fix the U140D code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the U140D code diagnosed by a professional: Find a repair shop in your area
Information for Specific Makes
- U140D Chrysler — Implausible Wheel Speed Signal Received
- U140D Dodge — Implausible Wheel Speed Signal Received
- U140D Jeep — Implausible Wheel Speed Signal Received
- U140D RAM — Implausible Wheel Speed Signal Received
Frequently Asked Questions about U140D Code
1. What are the common symptoms of OBDII code U140D (Implausible Wheel Speed Signal Received)?
- Common symptoms include the ABS warning light illuminating on the dashboard, traction control system malfunction, and potential loss of stability control.
2. What can cause the OBDII code U140D to trigger?
- The code U140D can be triggered by issues such as damaged wheel speed sensors, faulty ABS modules, wiring problems, or sensor alignment issues.
3. How can I diagnose the cause of OBDII code U140D?
- To diagnose the cause of U140D, a professional diagnostic scanner is needed to read the ABS system codes, check the condition of wheel speed sensors, and inspect the wiring for any damage or loose connections.
4. Can driving with OBDII code U140D pose any risks?
- Driving with code U140D may lead to reduced braking performance, compromised stability control, and potential safety hazards in certain driving conditions. It is recommended to address the issue promptly.
5. What are some repair tips for fixing OBDII code U140D?
- Repair tips may include checking and cleaning wheel speed sensors, inspecting and repairing damaged wiring, resetting the ABS module, and ensuring proper sensor alignment.
6. Is it safe to continue driving my vehicle with the ABS warning light on due to code U140D?
- It is not recommended to continue driving with the ABS warning light on, as it indicates a malfunction in the anti-lock braking system, which can compromise your safety on the road.
7. How much does it typically cost to repair OBDII code U140D?
- The cost of repairing code U140D can vary depending on the underlying issue, parts needed for replacement, and labor costs. It is advisable to consult a mechanic for an accurate estimate.
8. Can I reset the OBDII code U140D on my own?
- While you can reset the code with an OBDII scanner, it is important to address the root cause of the issue to prevent the code from reoccurring. Simply clearing the code without fixing the problem will not solve the underlying issue.
9. Are there any recalls related to OBDII code U140D for my vehicle?
- It is recommended to check with the manufacturer or a dealership to inquire about any recalls or technical service bulletins related to code U140D for your specific vehicle make and model.
10. How can I prevent OBDII code U140D from occurring in the future?
- Regular maintenance of wheel speed sensors, ABS system components, and the vehicle's electrical system can help prevent code U140D. It is also important to address any related warning lights promptly to avoid potential issues.
Discuss the causes and fixes for U140D OBDII Code
Code U140D comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
