U140C Jeep Code - Implausible Right Rear Wheel Speed Signal Received
Quick Answer
The Diagnostic Trouble Code (DTC) sets when the Powertrain Control Module (PCM) detects an implausible Right Rear Wheel Speed signal over the Controller Area Network (CAN) bus from the Anti-Lock Brake (ABS) Module. Common causes include Faulty Right Rear Wheel Speed Sensor, Right Rear Wheel Speed Sensor harness is open or shorted, Right Rear Wheel Speed Sensor circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- U140C Jeep indicates Implausible Right Rear Wheel Speed Signal Received.
- Common causes
- Common causes include Faulty Right Rear Wheel Speed Sensor, Right Rear Wheel Speed Sensor harness is open or shorted, Right Rear Wheel Speed Sensor circuit poor electrical connection.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code U140C Jeep Description
What are the Possible Causes of the DTC U140C Jeep?
- Faulty Right Rear Wheel Speed Sensor
- Right Rear Wheel Speed Sensor harness is open or shorted
- Right Rear Wheel Speed Sensor circuit poor electrical connection
- Faulty Anti-Lock Brake System (ABS) Module
How to Fix the DTC U140C Jeep?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the U140C Jeep code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the U140C Jeep code?
Need more information on how to fix the U140C Jeep code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the U140C Jeep code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about U140C Jeep Code
1. What are the common symptoms of an U140C Jeep trouble code?
The common symptoms include ABS or traction control warning lights illuminated on the dashboard, potential loss of ABS and traction control functionality, and issues with vehicle stability during braking or cornering.
2. What can cause the U140C Jeep trouble code to appear?
The U140C code is often triggered by a faulty wheel speed sensor on the right rear wheel, damaged wiring or connectors in the sensor circuit, or issues with the ABS module.
3. How can I diagnose the cause of the U140C trouble code?
Diagnosing the U140C code involves using a professional OBDII scanner to read the code, inspecting the right rear wheel speed sensor and its wiring for damage, and testing the sensor's resistance and output signal.
4. Can I still drive my Jeep with the U140C code present?
While it may be possible to drive the vehicle with the U140C code, it is not recommended as it can affect the ABS and traction control systems, compromising safety and vehicle stability.
5. How can I repair the U140C Jeep trouble code?
Repairing the U140C code typically involves replacing the right rear wheel speed sensor, repairing or replacing damaged wiring or connectors, and clearing the code with a diagnostic tool.
6. Are there any DIY tips for fixing the U140C code?
If you have experience working on automotive electrical systems, you may be able to replace the wheel speed sensor yourself. However, it's recommended to consult a professional if you're unsure.
7. Can the U140C trouble code be intermittent?
Yes, the U140C code can sometimes be intermittent, meaning it may come and go depending on the condition of the wheel speed sensor or wiring. It's essential to address the issue promptly.
8. How much does it typically cost to repair the U140C Jeep trouble code?
The cost of repairing the U140C code can vary depending on the specific cause, but it may range from $100 to $300 for parts and labor at a dealership or repair shop.
9. Will the U140C code disappear on its own?
The U140C code will not disappear on its own. It needs to be properly diagnosed, repaired, and cleared with a diagnostic tool to reset the system and turn off the warning lights.
10. Can other Jeep models experience the U140C code?
While the U140C code is specific to Jeep vehicles, other makes and models may have similar codes related to wheel speed sensors and ABS systems.
Discuss the causes and fixes for U140C Jeep OBDII Code
Code U140C Jeep comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
