AutoCodesRAM – U1400 RAM

U1400 RAM Code - Implausible TPS Signal Received

Quick Answer

The purpose of the diagnostic is to monitor the Controller Area Network (CAN) BUS, the transmitted messages on the CAN BUS and the validity of the CAN signals. Common causes include Check for Powertrain Control Module (PCM) codes, Faulty Transmission Control Module (TCM), Transmission Control Module harness is open or shorted. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means
U1400 RAM indicates Implausible TPS Signal Received.
Common causes
Common causes include Check for Powertrain Control Module (PCM) codes, Faulty Transmission Control Module (TCM), Transmission Control Module harness is open or shorted.
Severity
High - diagnose this code as soon as possible.
Can I drive?
Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
AI answers can be wrong. Verify repairs with testing. Open full chat
Code Popularity 5,510
How popular is this code, among other codes? Low
Table of contents Created and updated by William Orellana on May 17, 2020
💬 Need more help? Ask Coddy for instant answers — it's free!

Code U1400 RAM Description

The purpose of the diagnostic is to monitor the Controller Area Network (CAN) BUS, the transmitted messages on the CAN BUS and the validity of the CAN signals. Several control units are connected to the CAN BUS which send their messages cyclically in a defined time window. The messages contain multiple signals representing vehicle information. The Diagnostic Trouble Code (DTC) sets when the Transmission Control Module (TCM) detects an incorrect CAN ID from the Powertrain Control Module (PCM).
OBDII Code U1400 RAM - Implausible TPS Signal Received - AutoCodes.com
U1400 RAM Code - Implausible TPS Signal Received

What are the Possible Causes of the DTC U1400 RAM?

  • Check for Powertrain Control Module (PCM) codes
  • Faulty Transmission Control Module (TCM)
  • Transmission Control Module harness is open or shorted
  • Transmission Control Module circuit poor electrical connection

How to Fix the DTC U1400 RAM?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the U1400 RAM code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the U1400 RAM code?

Need more information on how to fix the U1400 RAM code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the U1400 RAM code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about U1400 RAM Code

1. What does OBDII code U1400 mean on a RAM vehicle?

U1400 indicates that the vehicle's modules have detected an implausible signal from the Throttle Position Sensor (TPS).

2. What are common symptoms of code U1400 in a RAM vehicle?

Symptoms may include a check engine light, poor throttle response, reduced engine power, or rough idling.

3. What causes the U1400 code to appear?

Common causes include a malfunctioning Throttle Position Sensor (TPS), wiring issues, a faulty PCM (Powertrain Control Module), or corroded electrical connections.

4. Can a dirty throttle body cause the U1400 code?

Yes, excessive dirt on the throttle body can interfere with the TPS readings, potentially triggering the U1400 code.

5. How is the U1400 code diagnosed?

A technician will typically check the TPS for proper operation, inspect the wiring and connectors for damage, and use a scan tool to confirm the signal data from the TPS.

6. Can I drive my RAM with the U1400 code active?

While the vehicle may still be drivable, it’s not recommended as it could lead to further damage or unsafe driving conditions due to unstable throttle response.

7. How do I fix the U1400 code on my RAM?

Repairs may involve cleaning or replacing the TPS, fixing damaged wiring or connectors, or reprogramming or replacing the PCM if needed.

8. Is the U1400 code specific to RAM vehicles?

The U1400 code is commonly seen in RAM vehicles but can also appear in other vehicles using similar systems.

9. How much does it cost to repair the U1400 code?

The cost varies depending on the issue but typically ranges from $100 to $400, depending on whether the TPS, wiring, or PCM needs repair or replacement.

10. Can a software update fix the U1400 code?

In some cases, a software update for the PCM may resolve the issue if it’s related to miscommunication between modules.

Discuss the causes and fixes for U1400 RAM OBDII Code

Code U1400 RAM comments

No comments found for this page.

AutoCodes App

Fix Your Car Smarter

Try the New AutoCodes App!

Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.

AutoCodes App on Google Play