U1400 Jeep Code - Implausible TPS Signal Received
Quick Answer
The purpose of the diagnostic is to monitor the Controller Area Network (CAN) BUS, the transmitted messages on the CAN BUS and the validity of the CAN signals. Common causes include Check for Powertrain Control Module (PCM) codes, Faulty Transmission Control Module (TCM), Transmission Control Module harness is open or shorted. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- U1400 Jeep indicates Implausible TPS Signal Received.
- Common causes
- Common causes include Check for Powertrain Control Module (PCM) codes, Faulty Transmission Control Module (TCM), Transmission Control Module harness is open or shorted.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code U1400 Jeep Description
What are the Possible Causes of the DTC U1400 Jeep?
- Check for Powertrain Control Module (PCM) codes
- Faulty Transmission Control Module (TCM)
- Transmission Control Module harness is open or shorted
- Transmission Control Module circuit poor electrical connection
How to Fix the DTC U1400 Jeep?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the U1400 Jeep code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the U1400 Jeep code?
Need more information on how to fix the U1400 Jeep code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the U1400 Jeep code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about U1400 Jeep Code
1. What are the common symptoms of an U1400 OBDII code on a Jeep related to an implausible TPS signal?
- Common symptoms may include rough idling, stalling, poor acceleration, and the illumination of the Check Engine Light.
2. What could cause the U1400 OBDII code on a Jeep indicating an implausible TPS signal?
- Potential causes include a faulty throttle position sensor (TPS), a wiring issue in the TPS circuit, or a problem with the engine control module (ECM).
3. How can I diagnose the U1400 OBDII code on my Jeep for an implausible TPS signal?
- To diagnose this issue, you can use an OBDII scanner to read the code, visually inspect the TPS and its wiring for any visible damage, and perform a TPS sensor test using a multimeter.
4. Is it safe to continue driving my Jeep with the U1400 OBDII code related to an implausible TPS signal?
- It is not recommended to drive the vehicle with this code present, as it can lead to poor performance and potential safety hazards. It's best to address the issue promptly.
5. Can I reset the U1400 OBDII code on my Jeep indicating an implausible TPS signal without fixing the underlying problem?
- While you can clear the code using an OBDII scanner, the Check Engine Light is likely to come back on if the root cause of the issue is not addressed.
6. How can I repair the U1400 OBDII code on my Jeep for an implausible TPS signal?
- Repair options include replacing the throttle position sensor, repairing or replacing damaged wiring in the TPS circuit, or reprogramming the engine control module.
7. Are there any DIY tips for fixing the U1400 OBDII code related to an implausible TPS signal on my Jeep?
- If you're comfortable with automotive repairs, you can try replacing the TPS yourself using basic tools and following a detailed repair guide specific to your Jeep model.
8. Can a mechanic help me fix the U1400 OBDII code on my Jeep indicating an implausible TPS signal?
- Yes, a qualified mechanic can diagnose and repair the issue by conducting a thorough inspection, testing the TPS and related components, and performing the necessary repairs.
9. How much does it cost to fix the U1400 OBDII code for an implausible TPS signal on a Jeep?
- The cost of repairs can vary depending on the root cause of the issue, the labor rates of the mechanic, and the cost of parts. It's recommended to get a few quotes from different shops.
10. Will fixing the U1400 OBDII code on my Jeep related to an implausible TPS signal improve its performance?
- Yes, resolving this issue should lead to smoother idling, better acceleration, and overall improved performance of your Jeep.
Discuss the causes and fixes for U1400 Jeep OBDII Code
Code U1400 Jeep comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
