AutoCodes – Generic – U1325

U1325 Code - Automatic Back Door Control Module Calibration

Quick Answer

The Diagnostic Trouble Code (DTC) sets when the calibration of Automatic Back Door position information work is not successful. Common causes include Configuration work of Automatic Back Door Control Module, Faulty Automatic Back Door Control Module. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means: U1325 indicates Automatic Back Door Control Module Calibration.
Common causes: Common causes include Configuration work of Automatic Back Door Control Module, Faulty Automatic Back Door Control Module.
Severity: High - diagnose this code as soon as possible.
Can I drive?: Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

Save to My Repairs My Repairs

AI answers can be wrong. Verify repairs with testing. Open full chat

Code Popularity 2,424

How popular is this code, among other codes? Low

Repair Importance Level

Urgent (Diagnose now) (3 / 3)

Repair Difficulty Level

Advanced (Pro) (3 / 3)

What is this?

Table of contents Created and updated by William Orellana on May 16, 2020

Description
Possible Causes
How To Fix
Cost to Diagnose
FAQs
Comments
Add Comment

💬 Need more help? Ask Coddy for instant answers — it's free!

Code U1325 Description

The Diagnostic Trouble Code (DTC) sets when the calibration of Automatic Back Door position information work is not successful.

OBDII Code U1325 - Automatic Back Door Control Module Calibration - AutoCodes.com — U1325 Code - Automatic Back Door Control Module Calibration

What does this mean?

What are the Possible Causes of the DTC U1325?

Configuration work of Automatic Back Door Control Module
Faulty Automatic Back Door Control Module

How to Fix the DTC U1325?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the U1325 code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the U1325 code?

Need more information on how to fix the U1325 code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the U1325 code diagnosed by a professional: Find a repair shop in your area

Information for Specific Makes

U1325 Infiniti — Automatic Back Door Control Module Calibration
U1325 Nissan — Automatic Back Door Control Module Calibration

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about U1325 Code

1. What are the common symptoms of OBDII code U1325 related to the Automatic Back Door Control Module Calibration?

- Common symptoms include issues with the automatic back door not functioning properly, such as failing to open or close as intended.

2. What are the possible causes of OBDII code U1325?

- The code U1325 may be triggered due to a malfunction in the automatic back door control module or calibration issues within the system.

3. How can I diagnose the cause of OBDII code U1325?

- Diagnosing the U1325 code typically involves using a specialized OBDII scanner to retrieve the code and then performing further testing on the automatic back door control module and related components.

4. Can I still drive my vehicle with OBDII code U1325?

- While it may be possible to drive the vehicle with the U1325 code, it is recommended to address the issue promptly to prevent further damage to the automatic back door system.

5. Is it safe to attempt repairing OBDII code U1325 on my own?

- Repairing the U1325 code may require advanced knowledge of automotive systems. It is advisable to seek assistance from a qualified mechanic or technician familiar with automatic back door systems.

6. Are there any common DIY fixes for OBDII code U1325?

- DIY fixes for the U1325 code may include checking and securing any loose connections related to the automatic back door control module and ensuring proper calibration of the system.

7. How much does it typically cost to repair OBDII code U1325?

- The cost of repairing the U1325 code can vary depending on the specific issue causing the code and the labor rates of the repair shop. It is recommended to obtain quotes from multiple sources.

8. Can a faulty sensor trigger OBDII code U1325?

- Yes, a faulty sensor related to the automatic back door system can potentially trigger the U1325 code. It is important to perform a thorough diagnostic to identify the exact cause.

9. Will resetting the OBDII code U1325 make it go away permanently?

- Resetting the U1325 code without addressing the underlying issue will not make it go away permanently. The code is likely to reappear until the root cause is fixed.

10. How critical is it to repair OBDII code U1325 promptly?

- It is important to address the U1325 code promptly to ensure the proper functioning of the automatic back door system and prevent any potential safety hazards or further damage to the vehicle.