U1300 PONTIAC - Low Voltage On Class 2 Serial Data Circuit
U1300 PONTIAC Possible Causes
- Repair other code first
First diagnose U1300 PONTIAC code
Check the "Possible Causes" listed above. Visually inspect the related wiring harness and connectors. Check for damaged components and look for broken, bent, pushed out, or corroded terminals.
U1300 PONTIAC Tech NotesIn most cases, the P1300 code is combined with other codes, fix other codes first.
Cost of diagnosing the U1300 PONTIAC code
Labor: 1.0The cost of diagnosing the U1300 PONTIAC code is 1.0 hour of labor. The auto repair labor rates vary by location, your vehicle's make and model, and even your engine type. Most auto repairs shops charge between $75 and $150 per hour.
U1300 PONTIAC Possible Symptoms
- Engine Light ON (or Service Engine Soon Warning Light)
U1300 Pontiac DescriptionModules connected to the class 2 serial data circuit monitor for serial data communications during normal vehicle operation. Operating information and commands are exchanged among the modules. In addition to this, Node Alive messages are transmitted by each module on the class 2 serial data circuit about once every 2 seconds. When the module detects one of the following conditions on the class 2 serial data circuit for approximately 3 seconds, the setting of all other class 2 serial communication DTCs is inhibited and a DTC will set.
U1300 PONTIAC More InformationNeed more information on how to fix the U1300 PONTIAC code?
Get Access to Factory Service Manuals
Need more help?Get the U1300 Pontiac code diagnosed by a professional: Find a repair shop in your area
U1300 PONTIAC CommentsHelp us improve AutoCodes.com. Leave a comment below or tell us if the information above help you fix the code. What are the symptoms on your vehicle for the U1300 Pontiac code? Have you replaced any parts?
Any information is appreciated. Thanks