U128C Code - Lost Communication With The Wiper Control Unit
Quick Answer
The Diagnostic Trouble Code (DTC) sets when a communication malfunction was detected between the Gauge Control Module and the Wiper Control Unit. Common causes include Faulty Wiper Control Unit, Wiper Control Unit harness is open or shorted, Wiper Control Unit circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- U128C indicates Lost Communication With The Wiper Control Unit.
- Common causes
- Common causes include Faulty Wiper Control Unit, Wiper Control Unit harness is open or shorted, Wiper Control Unit circuit poor electrical connection.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code U128C Description
What are the Possible Causes of the DTC U128C?
- Faulty Wiper Control Unit
- Wiper Control Unit harness is open or shorted
- Wiper Control Unit circuit poor electrical connection
How to Fix the DTC U128C?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the U128C code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the U128C code?
Need more information on how to fix the U128C code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the U128C code diagnosed by a professional: Find a repair shop in your area
Information for Specific Makes
- U128C Acura — Lost Communication With The Wiper Control Unit
- U128C Honda — Lost Communication With The Wiper Control Unit
Frequently Asked Questions about U128C Code
1. What are the common symptoms of OBDII code U128C (Lost Communication With The Wiper Control Unit)?
- Common symptoms include inoperative wipers, erratic wiper movement, wipers not returning to the park position, and potential loss of other related functions.
2. What are the possible causes of OBDII code U128C?
- The code U128C can be caused by issues such as a faulty wiper control unit, damaged wiring or connectors in the wiper system, a blown fuse, or a malfunctioning body control module.
3. How can I diagnose the reason behind OBDII code U128C?
- To diagnose the issue, you can start by checking the wiper fuse, inspecting the wiring and connectors for damage, testing the wiper control unit for functionality, and scanning the vehicle's computer for any related trouble codes.
4. Can a DIY enthusiast repair OBDII code U128C at home?
- Depending on the cause, some DIY repairs may be possible, such as replacing a blown fuse or fixing a loose connector. However, diagnosing and repairing complex issues like a faulty control unit may require professional assistance.
5. Is it safe to drive with OBDII code U128C active?
- While the code itself may not affect the drivability of the vehicle, it is not recommended to drive with malfunctioning wipers as it can compromise visibility during adverse weather conditions, posing a safety risk.
6. How much does it typically cost to repair OBDII code U128C?
- The cost of repairing OBDII code U128C can vary widely depending on the underlying cause. Simple fixes like replacing a fuse may cost less than $50, but more complex issues like replacing a control unit can cost several hundred dollars.
7. Can resetting the OBDII code U128C by clearing the fault codes fix the issue?
- Clearing the fault codes may temporarily reset the warning light, but if the underlying problem persists, the code is likely to reappear. It's essential to diagnose and address the root cause of the communication error.
8. Are there any preventative measures to avoid OBDII code U128C in the future?
- Regularly checking the wiper system for any signs of wear or damage, ensuring proper maintenance of the electrical components, and addressing any issues promptly can help prevent the recurrence of code U128C.
9. Can extreme weather conditions contribute to triggering OBDII code U128C?
- Yes, extreme weather conditions like heavy rain, snow, or ice accumulation can potentially affect the wiper control unit's operation and lead to a loss of communication, triggering the U128C trouble code.
10. How long does it typically take to diagnose and repair OBDII code U128C?
- The time required to diagnose and repair code U128C can vary based on the complexity of the issue. Simple fixes may take less than an hour, while more involved repairs could require several hours or even a day at a repair shop.
Discuss the causes and fixes for U128C OBDII Code
Code U128C comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
