AutoCodes – Acura – U1288 Acura

U1288 Acura Code - Lost Communication With PARKSR

Quick Answer

The Diagnostic Trouble Code (DTC) sets when a communication malfunction was detected between the Gauge Control Module and the Parking and Back-Up Sensor (PARKSR) Control Unit. Common causes include Faulty Gauge Control Module, Gauge Control Module harness is open or shorted, Gauge Control Module circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means
U1288 Acura indicates Lost Communication With PARKSR.
Common causes
Common causes include Faulty Gauge Control Module, Gauge Control Module harness is open or shorted, Gauge Control Module circuit poor electrical connection.
Severity
High - diagnose this code as soon as possible.
Can I drive?
Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
AI answers can be wrong. Verify repairs with testing. Open full chat
Code Popularity 758
How popular is this code, among other codes? Low
Table of contents Created and updated by William Orellana on May 10, 2020
πŸ’¬ Need more help? Ask Coddy for instant answers β€” it's free!

Code U1288 Acura Description

The Diagnostic Trouble Code (DTC) sets when a communication malfunction was detected between the Gauge Control Module and the Parking and Back-Up Sensor (PARKSR) Control Unit.
OBDII Code U1288 Acura - Lost Communication With PARKSR - AutoCodes.com
U1288 Acura Code - Lost Communication With PARKSR

What are the Possible Causes of the DTC U1288 Acura?

  • Faulty Gauge Control Module
  • Gauge Control Module harness is open or shorted
  • Gauge Control Module circuit poor electrical connection
  • Faulty Parking and Back-Up Sensor (PARKSR) Control Unit

How to Fix the DTC U1288 Acura?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the U1288 Acura code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the U1288 Acura code?

Need more information on how to fix the U1288 Acura code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the U1288 Acura code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about U1288 Acura Code

1. What are the common symptoms of OBDII code U1288 in an Acura related to Lost Communication With PARKSR?

The common symptoms include the malfunction indicator light (MIL) illuminating on the dashboard, issues with the park assist system, and potential intermittent electrical problems.

2. What could be causing the OBDII code U1288 in an Acura related to Lost Communication With PARKSR?

The code U1288 typically indicates a communication error between the vehicle's control modules and the park assist system, which could be caused by damaged wiring, a faulty control module, or a malfunctioning sensor.

3. How can I diagnose the cause of OBDII code U1288 in my Acura?

To diagnose the issue, you can start by checking the wiring connections, inspecting the park assist sensors for damage, and using a diagnostic scanner to read the specific fault codes stored in the system.

4. Can I continue driving my Acura with the OBDII code U1288 related to Lost Communication With PARKSR?

While you can still drive the vehicle with this code, it is recommended to address the underlying issue as soon as possible to prevent potential safety hazards and further damage to the park assist system.

5. Is it possible to repair the OBDII code U1288 in an Acura related to Lost Communication With PARKSR myself?

Depending on your level of automotive knowledge and experience, you may be able to address the issue yourself by checking the wiring connections, replacing faulty sensors, or resetting the control modules. However, complex electrical repairs may require professional help.

6. Will resetting the OBDII code U1288 in my Acura temporarily fix the issue?

Resetting the code may temporarily clear the MIL from the dashboard, but if the underlying problem causing the communication error is not addressed, the code is likely to reappear.

7. How much does it typically cost to repair the OBDII code U1288 related to Lost Communication With PARKSR in an Acura?

The cost of repair can vary depending on the specific cause of the issue, but it may involve expenses for parts replacement, labor costs, and diagnostic fees. It's advisable to consult with a mechanic for a more accurate estimate.

8. Can extreme weather conditions affect the occurrence of OBDII code U1288 in an Acura related to Lost Communication With PARKSR?

Extreme temperatures or moisture can potentially impact the electrical connections and sensors involved in the park assist system, leading to communication errors and triggering the U1288 trouble code.

9. Are there any preventive maintenance measures I can take to avoid OBDII code U1288 in my Acura related to Lost Communication With PARKSR?

Regularly inspecting the park assist system components, ensuring proper wiring connections, and keeping the sensors clean from debris can help prevent communication errors that trigger the U1288 code.

10. Will ignoring the OBDII code U1288 in my Acura related to Lost Communication With PARKSR lead to further damage?

Ignoring the code may result in continued issues with the park assist system, potential safety concerns while parking, and could lead to more extensive repairs in the future if left unresolved.

Discuss the causes and fixes for U1288 Acura OBDII Code

Code U1288 Acura comments

No comments found for this page.

AutoCodes App

Fix Your Car Smarter

Try the New AutoCodes App!

Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.

AutoCodes App on Google Play