U11F6 Jeep Code - Lost Communication With Convergenece Telematics Module
Quick Answer
The primary communication network between electronic control modules is the Controller Area Network (CAN) data bus system. Common causes include Faulty Convergence Telematics Module (CTM), Convergence Telematics Module harness is open or shorted, Convergence Telematics Module circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- U11F6 Jeep indicates Lost Communication With Convergenece Telematics Module.
- Common causes
- Common causes include Faulty Convergence Telematics Module (CTM), Convergence Telematics Module harness is open or shorted, Convergence Telematics Module circuit poor electrical connection.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code U11F6 Jeep Description
The Diagnostic Trouble Code (DTC) sets when the Bus messages not received from the Convergence Telematics Module (CTM) for approximately ten seconds.
What are the Possible Causes of the DTC U11F6 Jeep?
- Faulty Convergence Telematics Module (CTM)
- Convergence Telematics Module harness is open or shorted
- Convergence Telematics Module circuit poor electrical connection
How to Fix the DTC U11F6 Jeep?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the U11F6 Jeep code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the U11F6 Jeep code?
Need more information on how to fix the U11F6 Jeep code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the U11F6 Jeep code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about U11F6 Jeep Code
1. What are the common symptoms of OBDII code U11F6 in a Jeep related to the lost communication with the Convergence Telematics Module?
- Common symptoms include issues with the vehicle's telematics system, such as loss of GPS signal, malfunctioning navigation features, and failure to connect to emergency services.
2. What are some possible causes of the U11F6 code indicating lost communication with the Convergence Telematics Module in a Jeep?
- Possible causes include a faulty telematics module, wiring or connection issues, software glitches, or a malfunction in the vehicle's communication network.
3. How can I diagnose the U11F6 code in my Jeep if I suspect a problem with the Convergence Telematics Module?
- A diagnostic scan tool can be used to retrieve the specific error codes, check for communication faults, and identify the exact source of the problem within the telematics system.
4. What are some recommended repair tips for addressing the U11F6 code in a Jeep experiencing communication issues with the Convergence Telematics Module?
- Repair tips may include checking and repairing any damaged wiring or connections, updating the telematics module software, or replacing the module if necessary.
5. Can the U11F6 code in a Jeep related to the Convergence Telematics Module cause other systems in the vehicle to malfunction?
- Yes, communication issues within the telematics system can potentially affect other vehicle systems that rely on its data, leading to additional malfunctions or error codes.
6. Is it safe to continue driving my Jeep with the U11F6 code indicating lost communication with the Convergence Telematics Module?
- While the vehicle may still be operational, it is recommended to address the communication issue promptly to avoid potential safety risks and ensure the proper functioning of the telematics features.
7. How much does it typically cost to repair the U11F6 code related to the Convergence Telematics Module in a Jeep?
- Repair costs can vary depending on the exact cause of the communication issue, but they may range from a few hundred to over a thousand dollars, including parts and labor.
8. Can I attempt to reset the U11F6 code on my own in a Jeep to see if the communication issue with the Convergence Telematics Module resolves itself?
- While clearing the code temporarily may be possible, it is essential to address the underlying cause of the communication problem to prevent the code from reappearing and ensure proper system functionality.
9. Are there any recalls or technical service bulletins related to the U11F6 code and the Convergence Telematics Module in Jeep vehicles?
- It is advisable to check with a Jeep dealership or refer to online resources for any relevant recalls or technical service bulletins that may pertain to the U11F6 code and associated telematics system issues.
10. How can I prevent future occurrences of the U11F6 code indicating lost communication with the Convergence Telematics Module in my Jeep?
- Regular maintenance, timely software updates, and addressing any communication-related issues promptly can help prevent the recurrence of the U11F6 code and maintain the proper functioning of the telematics system.
Discuss the causes and fixes for U11F6 Jeep OBDII Code
Code U11F6 Jeep comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
