AutoCodes – RAM – U11EE RAM

U11EE RAM Code - Lost Communication With Right C-Pillar Impact Acceleration Sensor

Quick Answer

The impact sensors perform their own self-test using power supplied by the Occupant Restraint Controller (ORC) then communicate this status back to the ORC with periodic updates. Common causes include Faulty Right C-Pillar Impact Acceleration Sensor, Right C-Pillar Impact Acceleration Sensor harness is open or shorted, Right C-Pillar Impact Acceleration Sensor circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means: U11EE RAM indicates Lost Communication With Right C-Pillar Impact Acceleration Sensor.
Common causes: Common causes include Faulty Right C-Pillar Impact Acceleration Sensor, Right C-Pillar Impact Acceleration Sensor harness is open or shorted, Right C-Pillar Impact Acceleration Sensor circuit poor electrical connection.
Severity: High - diagnose this code as soon as possible.
Can I drive?: Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

Save to My Repairs My Repairs

AI answers can be wrong. Verify repairs with testing. Open full chat

Code Popularity 423

How popular is this code, among other codes? Low

Repair Importance Level

Urgent (Diagnose now) (3 / 3)

Repair Difficulty Level

Advanced (Pro) (3 / 3)

What is this?

Table of contents Created and updated by William Orellana on May 03, 2020

Description
Possible Causes
How To Fix
Cost to Diagnose
FAQs
Comments
Add Comment

💬 Need more help? Ask Coddy for instant answers — it's free!

Code U11EE RAM Description

The impact sensors perform their own self-test using power supplied by the Occupant Restraint Controller (ORC) then communicate this status back to the ORC with periodic updates. The repair of this fault condition involves verifying the integrity of the wiring between the ORC and the sensor. This code will set, if the ORC and the Right Side Impact Sensor 2 do not establish and maintain valid data communications. The Diagnostic Trouble Code (DTC) will become active after the fault has set for a minimum of 2.5 seconds. The DTC will go to Stored after the ORC to Right Side Impact Sensor 2 communication fault has been removed or the suspect sensor has been replaced for 2.5 seconds. The Airbag Warning Lamp (AWL) will set in the instrument cluster.

OBDII Code U11EE RAM - Lost Communication With Right C-Pillar Impact Acceleration Sensor - AutoCodes.com — U11EE RAM Code - Lost Communication With Right C-Pillar Impact Acceleration Sensor

What does this mean?

What are the Possible Causes of the DTC U11EE RAM?

Faulty Right C-Pillar Impact Acceleration Sensor
Right C-Pillar Impact Acceleration Sensor harness is open or shorted
Right C-Pillar Impact Acceleration Sensor circuit poor electrical connection
Faulty Occupant Restraint Controller (ORC)

How to Fix the DTC U11EE RAM?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the U11EE RAM code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the U11EE RAM code?

Need more information on how to fix the U11EE RAM code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the U11EE RAM code diagnosed by a professional: Find a repair shop in your area

Precautions for SRS “AIR BAG” and “SEAT BELT PRE-TENSIONER” Service

Never probe the electrical connectors on air bag, side air curtain modules or seat belts.
Never disassemble or tamper with safety belt buckle/retractor pretensioners, adaptive load limiting retractors, safety belt inflators, or probe the electrical connectors.
Do not use electrical test equipment to check SRS circuits unless instructed to in this Service Manual.
Before servicing the SRS, turn ignition switch OFF, disconnect both battery cables and wait at least 3 minutes. For approximately 3 minutes after the cables are removed, it is still possible for the air bag and seat belt pre-tensioner to deploy. Therefore, do not work on any SRS connectors or wires until at least 3 minutes have passed.

Failure to follow this instruction may result in the accidental deployment of these modules, which increases the risk of serious personal injury or death.

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about U11EE RAM Code

1. What are the common symptoms of OBDII code U11EE in a RAM truck?

- Common symptoms include the airbag warning light illuminating on the dashboard, loss of communication with the right C-pillar impact acceleration sensor, and potential disabling of the airbag system.

2. What causes the OBDII code U11EE in a RAM truck?

- The code U11EE is typically triggered by a communication failure between the vehicle's onboard diagnostic system and the right C-pillar impact acceleration sensor.

3. How can I diagnose the U11EE code in my RAM truck?

- Diagnosis involves using a scan tool to retrieve the specific fault code, checking the wiring connections to the right C-pillar impact acceleration sensor, and verifying the sensor's functionality.

4. Can I continue driving my RAM truck with the U11EE code present?

- It is not recommended to continue driving the vehicle with the U11EE code active, as this may compromise the proper function of the airbag system in the event of a collision.

5. How can I repair the U11EE code in my RAM truck?

- Repair typically involves inspecting and repairing any damaged wiring or connectors related to the right C-pillar impact acceleration sensor, resetting the fault code, and ensuring proper communication between the sensor and the vehicle's onboard system.

6. Is it safe to reset the U11EE code without fixing the underlying issue?

- It is not recommended to simply reset the code without addressing the root cause, as this may lead to potential safety hazards in the event of an accident.

7. Can extreme weather conditions trigger the U11EE code in a RAM truck?

- Extreme weather conditions, such as excessive heat or moisture, can sometimes cause temporary communication issues with the right C-pillar impact acceleration sensor, leading to the U11EE fault code.

8. How much does it cost to fix the U11EE code in a RAM truck?

- The cost of repairing the U11EE code can vary depending on the extent of the issue, but it generally involves inspecting and repairing wiring connections, which may range from a few hundred to a thousand dollars.

9. Will the U11EE code prevent my RAM truck from passing a state inspection?

- The U11EE code may result in a failed state inspection, as it indicates a fault in the airbag system, which is an essential safety component that is typically required to be in working order for vehicle inspection.

10. Can a DIY enthusiast fix the U11EE code in a RAM truck?

- While some DIY enthusiasts may have the skills to diagnose and repair simple wiring issues related to the U11EE code, it is recommended to seek professional help for more complex repairs to ensure the proper functioning of the airbag system.