AutoCodes – Dodge – U11EE Dodge

U11EE Dodge Code - Lost Communication With Right C-Pillar Impact Acceleration Sensor

Quick Answer

The impact sensors perform their own self-test using power supplied by the Occupant Restraint Controller (ORC) then communicate this status back to the ORC with periodic updates. Common causes include Faulty Right C-Pillar Impact Acceleration Sensor, Right C-Pillar Impact Acceleration Sensor harness is open or shorted, Right C-Pillar Impact Acceleration Sensor circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means: U11EE Dodge indicates Lost Communication With Right C-Pillar Impact Acceleration Sensor.
Common causes: Common causes include Faulty Right C-Pillar Impact Acceleration Sensor, Right C-Pillar Impact Acceleration Sensor harness is open or shorted, Right C-Pillar Impact Acceleration Sensor circuit poor electrical connection.
Severity: High - diagnose this code as soon as possible.
Can I drive?: Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

Save to My Repairs My Repairs

AI answers can be wrong. Verify repairs with testing. Open full chat

Code Popularity 1,906

How popular is this code, among other codes? Low

Repair Importance Level

Urgent (Diagnose now) (3 / 3)

Repair Difficulty Level

Advanced (Pro) (3 / 3)

What is this?

Table of contents Created and updated by William Orellana on May 03, 2020

Description
Possible Causes
How To Fix
Cost to Diagnose
FAQs
Comments
Add Comment

💬 Need more help? Ask Coddy for instant answers — it's free!

Code U11EE Dodge Description

The impact sensors perform their own self-test using power supplied by the Occupant Restraint Controller (ORC) then communicate this status back to the ORC with periodic updates. The repair of this fault condition involves verifying the integrity of the wiring between the ORC and the sensor. This code will set, if the ORC and the Right Side Impact Sensor 2 do not establish and maintain valid data communications. The Diagnostic Trouble Code (DTC) will become active after the fault has set for a minimum of 2.5 seconds. The DTC will go to Stored after the ORC to Right Side Impact Sensor 2 communication fault has been removed or the suspect sensor has been replaced for 2.5 seconds. The Airbag Warning Lamp (AWL) will set in the instrument cluster.

OBDII Code U11EE Dodge - Lost Communication With Right C-Pillar Impact Acceleration Sensor - AutoCodes.com — U11EE Dodge Code - Lost Communication With Right C-Pillar Impact Acceleration Sensor

What does this mean?

What are the Possible Causes of the DTC U11EE Dodge?

Faulty Right C-Pillar Impact Acceleration Sensor
Right C-Pillar Impact Acceleration Sensor harness is open or shorted
Right C-Pillar Impact Acceleration Sensor circuit poor electrical connection
Faulty Occupant Restraint Controller (ORC)

How to Fix the DTC U11EE Dodge?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the U11EE Dodge code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the U11EE Dodge code?

Need more information on how to fix the U11EE Dodge code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the U11EE Dodge code diagnosed by a professional: Find a repair shop in your area

Precautions for SRS “AIR BAG” and “SEAT BELT PRE-TENSIONER” Service

Never probe the electrical connectors on air bag, side air curtain modules or seat belts.
Never disassemble or tamper with safety belt buckle/retractor pretensioners, adaptive load limiting retractors, safety belt inflators, or probe the electrical connectors.
Do not use electrical test equipment to check SRS circuits unless instructed to in this Service Manual.
Before servicing the SRS, turn ignition switch OFF, disconnect both battery cables and wait at least 3 minutes. For approximately 3 minutes after the cables are removed, it is still possible for the air bag and seat belt pre-tensioner to deploy. Therefore, do not work on any SRS connectors or wires until at least 3 minutes have passed.

Failure to follow this instruction may result in the accidental deployment of these modules, which increases the risk of serious personal injury or death.

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about U11EE Dodge Code

1. What are the common symptoms of OBDII code U11EE in a Dodge related to the right C-pillar impact acceleration sensor?

The common symptoms include the airbag warning light being illuminated on the dashboard, potential loss of communication with the right C-pillar impact acceleration sensor, and possible issues with the airbag system.

2. What are the possible causes of the U11EE code indicating lost communication with the right C-pillar impact acceleration sensor in a Dodge?

Potential causes can include wiring or connection issues in the sensor circuit, a faulty sensor, a blown fuse related to the sensor, or a malfunction in the airbag control module.

3. How can I diagnose the U11EE code for the right C-pillar impact acceleration sensor issue in my Dodge?

Diagnosis typically involves using a professional OBDII scanner to retrieve the specific fault codes, inspecting the sensor wiring and connections for any damage, checking the sensor itself for proper operation, and testing the related fuses.

4. Can I still drive my Dodge if the U11EE code related to the right C-pillar impact acceleration sensor is present?

It is not recommended to drive the vehicle with an active airbag system fault code like U11EE, as it may indicate potential safety risks and compromise the effectiveness of the airbag system in the event of an accident.

5. How can I repair the U11EE code indicating lost communication with the right C-pillar impact acceleration sensor in my Dodge?

Repair options may include fixing any damaged wiring or connections, replacing the faulty sensor, addressing any blown fuses, or reprogramming the airbag control module if needed.

6. Is it possible to reset the U11EE code for the right C-pillar impact acceleration sensor issue without fixing the underlying problem?

While clearing the fault code with an OBDII scanner may temporarily turn off the warning light, it will not resolve the root cause of the issue related to the right C-pillar impact acceleration sensor.

7. How important is it to fix the U11EE code related to the right C-pillar impact acceleration sensor in a timely manner?

It is crucial to address this issue promptly to ensure the proper functioning of the airbag system and maintain the safety features of your Dodge in case of a collision or impact.

8. Can I attempt to fix the U11EE code issue with the right C-pillar impact acceleration sensor in my Dodge myself, or should I seek professional help?

While some simple checks like inspecting connections can be done by DIY enthusiasts, it is recommended to consult a qualified mechanic or dealership for a thorough diagnosis and repair of the airbag system fault indicated by the U11EE code.

9. Are there any recalls or technical service bulletins related to the U11EE code for lost communication with the right C-pillar impact acceleration sensor in Dodge vehicles?

It is advisable to check with Dodge or authorized service centers for any recalls or technical bulletins that may address issues with the right C-pillar impact acceleration sensor and the associated U11EE fault code.

10. How can I prevent the U11EE code from occurring again after repairing the right C-pillar impact acceleration sensor issue in my Dodge?

After fixing the problem, regular maintenance checks, ensuring proper wiring connections, and promptly addressing any airbag system warning lights can help prevent the recurrence of the U11EE fault code.