U11EE Chrysler Code - Lost Communication With Right C-Pillar Impact Acceleration Sensor
Quick Answer
The impact sensors perform their own self-test using power supplied by the Occupant Restraint Controller (ORC) then communicate this status back to the ORC with periodic updates. Common causes include Faulty Right C-Pillar Impact Acceleration Sensor, Right C-Pillar Impact Acceleration Sensor harness is open or shorted, Right C-Pillar Impact Acceleration Sensor circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- U11EE Chrysler indicates Lost Communication With Right C-Pillar Impact Acceleration Sensor.
- Common causes
- Common causes include Faulty Right C-Pillar Impact Acceleration Sensor, Right C-Pillar Impact Acceleration Sensor harness is open or shorted, Right C-Pillar Impact Acceleration Sensor circuit poor electrical connection.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code U11EE Chrysler Description
What are the Possible Causes of the DTC U11EE Chrysler?
- Faulty Right C-Pillar Impact Acceleration Sensor
- Right C-Pillar Impact Acceleration Sensor harness is open or shorted
- Right C-Pillar Impact Acceleration Sensor circuit poor electrical connection
- Faulty Occupant Restraint Controller (ORC)
How to Fix the DTC U11EE Chrysler?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the U11EE Chrysler code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the U11EE Chrysler code?
Need more information on how to fix the U11EE Chrysler code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the U11EE Chrysler code diagnosed by a professional: Find a repair shop in your area
Precautions for SRS “AIR BAG” and “SEAT BELT PRE-TENSIONER” Service
- Never probe the electrical connectors on air bag, side air curtain modules or seat belts.
- Never disassemble or tamper with safety belt buckle/retractor pretensioners, adaptive load limiting retractors, safety belt inflators, or probe the electrical connectors.
- Do not use electrical test equipment to check SRS circuits unless instructed to in this Service Manual.
- Before servicing the SRS, turn ignition switch OFF, disconnect both battery cables and wait at least 3 minutes. For approximately 3 minutes after the cables are removed, it is still possible for the air bag and seat belt pre-tensioner to deploy. Therefore, do not work on any SRS connectors or wires until at least 3 minutes have passed.
Failure to follow this instruction may result in the accidental deployment of these modules, which increases the risk of serious personal injury or death.
Frequently Asked Questions about U11EE Chrysler Code
1. What are the common symptoms of OBDII code U11EE in a Chrysler indicating a lost communication with the right C-pillar impact acceleration sensor?
The common symptoms include the airbag warning light illuminating on the dashboard, potential loss of communication with the right C-pillar impact acceleration sensor, and in some cases, the airbag system may be disabled.
2. What are the possible causes of the U11EE code in a Chrysler?
The code U11EE typically indicates a communication breakdown between the vehicle's onboard computer and the right C-pillar impact acceleration sensor. This can be caused by damaged wiring, a faulty sensor, loose connections, or a malfunction in the airbag control module.
3. How can I diagnose the U11EE code related to the right C-pillar impact acceleration sensor in my Chrysler?
Diagnosing the U11EE code usually involves conducting a thorough inspection of the wiring harness, connectors, and sensor itself. Using a diagnostic scanner to retrieve additional fault codes and data can also help pinpoint the exact cause of the communication issue.
4. Can I still drive my Chrysler if the U11EE code is present?
It is not recommended to drive the vehicle with an active U11EE code, as it may indicate a problem with the airbag system, compromising passenger safety. It is advisable to address the issue promptly to ensure the proper functioning of the safety systems.
5. How can I repair the U11EE code associated with the right C-pillar impact acceleration sensor in my Chrysler?
Repairing the U11EE code may involve repairing or replacing damaged wiring, ensuring proper connections, replacing the faulty sensor, or addressing any issues with the airbag control module. It is recommended to consult a professional mechanic for a thorough diagnosis and repair.
6. Is it safe to reset the U11EE code without addressing the underlying issue?
Resetting the code without addressing the root cause of the communication problem is not recommended. It may temporarily clear the warning light but does not fix the underlying issue, potentially putting the safety systems at risk.
7. Can extreme weather conditions affect the right C-pillar impact acceleration sensor communication in a Chrysler?
Extreme weather conditions, such as excessive heat or moisture, can potentially impact the sensor's performance and communication. It is essential to ensure proper sealing and protection of the sensor to prevent weather-related issues.
8. How much does it cost to repair the U11EE code related to the right C-pillar impact acceleration sensor in a Chrysler?
The cost of repairing the U11EE code can vary depending on the exact cause of the communication issue, the required parts, and labor costs. It is advisable to obtain a few quotes from reputable repair shops for an accurate estimate.
9. Can a DIY enthusiast fix the U11EE code on a Chrysler, or is professional help necessary?
While some basic troubleshooting steps can be performed by DIY enthusiasts, diagnosing and repairing the U11EE code related to the right C-pillar impact acceleration sensor may require specialized tools and expertise. It is recommended to seek professional help for a comprehensive repair.
10. How often should I check the right C-pillar impact acceleration sensor for potential communication issues in my Chrysler?
Regular maintenance checks, especially during routine service intervals or when performing other repairs, can help identify potential communication issues with the right C-pillar impact acceleration sensor early on. It is advisable to include sensor inspections as part of your vehicle maintenance routine.
Discuss the causes and fixes for U11EE Chrysler OBDII Code
Code U11EE Chrysler comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
