U11E2 Chrysler Code - Lost Barometric Pressure Message
Quick Answer
This diagnostic determines the availability of the Atmospheric Pressure signal sent by the Powertrain Control Module (PCM) via a Controller Area Network (CAN) message. Common causes include Faulty Powertrain Control Module (PCM), Faulty Transmission Control Module (TCM). Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- U11E2 Chrysler indicates Lost Barometric Pressure Message.
- Common causes
- Common causes include Faulty Powertrain Control Module (PCM), Faulty Transmission Control Module (TCM).
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code U11E2 Chrysler Description
What are the Possible Causes of the DTC U11E2 Chrysler?
- Faulty Powertrain Control Module (PCM)
- Faulty Transmission Control Module (TCM)
How to Fix the DTC U11E2 Chrysler?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the U11E2 Chrysler code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the U11E2 Chrysler code?
Need more information on how to fix the U11E2 Chrysler code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the U11E2 Chrysler code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about U11E2 Chrysler Code
1. What does the U11E2 code in a Chrysler vehicle mean?
The U11E2 code indicates a Lost Barometric Pressure Message in the vehicle's On-Board Diagnostics system.
2. What are the common symptoms of the U11E2 code?
Common symptoms of the U11E2 code may include poor engine performance, rough idling, and decreased fuel efficiency.
3. What can cause the U11E2 code to trigger in a Chrysler vehicle?
The U11E2 code is typically triggered by a faulty barometric pressure sensor, wiring issues, or a problem with the engine control module.
4. How can I diagnose the U11E2 code in my Chrysler vehicle?
Diagnosing the U11E2 code usually involves using an OBDII scanner to read the code, checking the barometric pressure sensor, and inspecting related wiring for any damage or loose connections.
5. Can I still drive my Chrysler with the U11E2 code present?
It is not recommended to drive your Chrysler with the U11E2 code present, as it can lead to further engine issues and potential damage.
6. How can I repair the U11E2 code in my Chrysler vehicle?
Repairing the U11E2 code may involve replacing the barometric pressure sensor, repairing any damaged wiring, or reprogramming the engine control module.
7. Is it possible to reset the U11E2 code without fixing the underlying issue?
While you can clear the U11E2 code with an OBDII scanner, it is important to address the underlying issue to prevent further problems.
8. Can weather changes affect the U11E2 code in a Chrysler vehicle?
Weather changes can impact barometric pressure readings and potentially trigger the U11E2 code, but the code usually indicates a failure in the sensor or related components.
9. Are there any preventative maintenance tips to avoid the U11E2 code in a Chrysler vehicle?
Regularly checking and maintaining the barometric pressure sensor, as well as keeping the engine control module in good condition, can help prevent the U11E2 code from appearing.
10. Could a disconnected or damaged vacuum line cause the U11E2 code in a Chrysler vehicle?
Yes, a disconnected or damaged vacuum line can affect barometric pressure readings and lead to the triggering of the U11E2 code.
Discuss the causes and fixes for U11E2 Chrysler OBDII Code
Code U11E2 Chrysler comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
