AutoCodes – Jeep – U11DE Jeep

U11DE Jeep Code - Lost Speed Control Message

Quick Answer

The Diagnostic Trouble Code (DTC) sets when the Powertrain Control Module (PCM) does not receive a Speed Control message from the Steering Column Control Module (SCCM) over the Controller Area Network (CAN) Bus. Common causes include Faulty Speed Control Switch Assembly, Faulty Steering Column Control Module (SCCM), Faulty Powertrain Control Module (PCM). Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means: U11DE Jeep indicates Lost Speed Control Message.
Common causes: Common causes include Faulty Speed Control Switch Assembly, Faulty Steering Column Control Module (SCCM), Faulty Powertrain Control Module (PCM).
Severity: High - diagnose this code as soon as possible.
Can I drive?: Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

Save to My Repairs My Repairs

AI answers can be wrong. Verify repairs with testing. Open full chat

Code Popularity 10,483

How popular is this code, among other codes? Low

Repair Importance Level

Urgent (Diagnose now) (3 / 3)

Repair Difficulty Level

Advanced (Pro) (3 / 3)

What is this?

Table of contents Created and updated by William Orellana on May 03, 2020

Description
Possible Causes
How To Fix
Cost to Diagnose
FAQs
Comments
Add Comment

💬 Need more help? Ask Coddy for instant answers — it's free!

Code U11DE Jeep Description

OBDII Code U11DE Jeep - Lost Speed Control Message - AutoCodes.com — U11DE Jeep Code - Lost Speed Control Message

What does this mean?

What are the Possible Causes of the DTC U11DE Jeep?

Faulty Speed Control Switch Assembly
Faulty Steering Column Control Module (SCCM)
Faulty Powertrain Control Module (PCM)

How to Fix the DTC U11DE Jeep?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the U11DE Jeep code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the U11DE Jeep code?

Need more information on how to fix the U11DE Jeep code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the U11DE Jeep code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about U11DE Jeep Code

1. What does the OBDII code U11DE for Jeep mean?

This code indicates a Lost Speed Control Message error in the Jeep's system.

2. What are the common symptoms of the U11DE code in a Jeep?

Common symptoms include the inability to engage cruise control, erratic speedometer readings, and the illumination of the check engine light.

3. What can cause the U11DE code to trigger in a Jeep?

The U11DE code may be triggered by a faulty speed control module, damaged wiring, or a poor connection in the speed control system.

4. How can I diagnose the U11DE code in my Jeep?

To diagnose the U11DE code, you can use an OBDII scanner to read the fault codes and inspect the speed control system components for any visible damage.

5. How do I repair the U11DE code in my Jeep?

Repairing the U11DE code may involve replacing the speed control module, repairing damaged wiring, or addressing any loose connections in the system.

6. Can I still drive my Jeep with the U11DE code present?

While it may be safe to drive your Jeep with the U11DE code present, it is recommended to have the issue diagnosed and repaired as soon as possible to prevent any potential safety hazards.

7. Is the U11DE code a common issue in Jeeps?

The U11DE code is not as common as some other OBDII codes, but it can occur in Jeeps with speed control system malfunctions.

8. How much does it cost to fix the U11DE code in a Jeep?

The cost of fixing the U11DE code can vary depending on the specific issue causing the error. It is recommended to consult with a mechanic for an accurate estimate.

9. Can I reset the U11DE code in my Jeep without repairs?

While you can clear the fault code using an OBDII scanner, it is important to address the underlying issue causing the U11DE code to prevent it from reoccurring.

10. How can I prevent the U11DE code from coming back in my Jeep?

Regularly inspecting and maintaining the speed control system, avoiding harsh driving conditions, and addressing any issues promptly can help prevent the U11DE code from reoccurring.