AutoCodes – Fiat – U11D4 Fiat

U11D4 Fiat Code - Lost Pedal Position Message

Quick Answer

This diagnostic checks the validity and availability of the gas pedal position signal which is sent by the Powertrain Control Module (PCM) via a CAN message. Common causes include Faulty Powertrain Control Module (PCM), Faulty Transmission Control Module (TCM). Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means: U11D4 Fiat indicates Lost Pedal Position Message.
Common causes: Common causes include Faulty Powertrain Control Module (PCM), Faulty Transmission Control Module (TCM).
Severity: High - diagnose this code as soon as possible.
Can I drive?: Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

Save to My Repairs My Repairs

AI answers can be wrong. Verify repairs with testing. Open full chat

Code Popularity 666

How popular is this code, among other codes? Low

Repair Importance Level

Urgent (Diagnose now) (3 / 3)

Repair Difficulty Level

Advanced (Pro) (3 / 3)

What is this?

Table of contents Created and updated by William Orellana on May 03, 2020

Description
Possible Causes
How To Fix
Cost to Diagnose
FAQs
Comments
Add Comment

💬 Need more help? Ask Coddy for instant answers — it's free!

Code U11D4 Fiat Description

This diagnostic checks the validity and availability of the gas pedal position signal which is sent by the Powertrain Control Module (PCM) via a CAN message. The diagnostic checks the validity by performing a CRC and message counter check to verify the gas pedal position signal is continuously updated by the PCM and that it has a valid value. The diagnostic also checks the availability by checking the received valid bit. A signal toggle bit and a signal parity bit are sent by the PCM within the CAN message. In order to be sure the message is continuously updated, the value of the toggle bit changes from 0 to 1 and vice versa every two messages. In order to be sure the message is valid, the parity bit value is set so that the sum of specific signals bits (the PDL_POS) of the message content plus the toggle bit plus the parity bit is an even number. If the toggle bit value does not change or the signal parity is not verified for a calibrated amount of time then the Diagnostic Trouble Code (DTC) U11D4 is set or when the signal is not available, the PCM sends a SNA default value to the TCM. If the TCM reads this value then DTC U11D4 is set.

OBDII Code U11D4 Fiat - Lost Pedal Position Message - AutoCodes.com — U11D4 Fiat Code - Lost Pedal Position Message

What does this mean?

What are the Possible Causes of the DTC U11D4 Fiat?

Faulty Powertrain Control Module (PCM)
Faulty Transmission Control Module (TCM)

How to Fix the DTC U11D4 Fiat?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the U11D4 Fiat code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the U11D4 Fiat code?

Need more information on how to fix the U11D4 Fiat code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the U11D4 Fiat code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about U11D4 Fiat Code

1. What are the common symptoms of OBDII code U11D4 Fiat (Lost Pedal Position Message)?

- Common symptoms include sudden loss of throttle response, engine stalling, and the vehicle going into limp mode.

2. What are the possible causes of the U11D4 code in a Fiat vehicle?

- The U11D4 code typically indicates a communication error between the electronic control modules responsible for monitoring pedal position.

3. How can I diagnose the U11D4 code in my Fiat for the Lost Pedal Position Message?

- A diagnostic scan tool can help identify the specific module or sensor that is failing to communicate properly and causing the U11D4 code to appear.

4. What are some basic repair tips for addressing the U11D4 code on a Fiat?

- Start by checking the wiring and connectors related to the pedal position sensors for any damage or corrosion. Resetting the fault codes and conducting a thorough inspection can also help in resolving the issue.

5. Can the U11D4 code be fixed without professional help?

- While some basic checks and repairs can be done by DIY enthusiasts, resolving the U11D4 code may require specialized equipment and expertise. Consulting a professional mechanic or dealership is recommended for accurate diagnosis and repair.

6. Is it safe to continue driving with the U11D4 code present in a Fiat?

- It is not recommended to drive the vehicle with the U11D4 code active, as it can lead to unexpected loss of throttle control and potentially unsafe driving conditions.

7. How much does it typically cost to repair the U11D4 code in a Fiat?

- The cost of repairing the U11D4 code can vary depending on the exact cause of the issue, the extent of the repairs needed, and labor costs. It is advisable to get a diagnostic assessment from a professional to determine the cost accurately.

8. Are there any preventive measures to avoid encountering the U11D4 code in a Fiat?

- Regular maintenance checks, including inspecting wiring harnesses and connectors, can help prevent issues that may trigger the U11D4 code. Keeping the vehicle well-maintained can reduce the likelihood of encountering such errors.

9. Can weather or environmental factors contribute to the U11D4 code appearing in a Fiat?

- Extreme weather conditions or exposure to moisture can potentially affect the electronic components and sensors involved in pedal position monitoring, leading to communication errors and triggering the U11D4 code.

10. How long does it take to repair the U11D4 code in a Fiat?

- The repair time for the U11D4 code can vary based on the complexity of the issue and the availability of replacement parts. In some cases, it may be a quick fix, while in others, it could take longer to diagnose and repair the underlying problem.