AutoCodes – Jeep – U11D0 Jeep

U11D0 Jeep Code - Lost Ignition Key Status Message

Quick Answer

This diagnostic checks for the availability of the Ignition Key Status signal which is sent by the Body Controller Module (BCM) via a Controller Area Network (CAN) message. Common causes include Faulty Powertrain Control Module (PCM), Faulty Body Control Module (BCM). Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means: U11D0 Jeep indicates Lost Ignition Key Status Message.
Common causes: Common causes include Faulty Powertrain Control Module (PCM), Faulty Body Control Module (BCM).
Severity: High - diagnose this code as soon as possible.
Can I drive?: Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

Save to My Repairs My Repairs

AI answers can be wrong. Verify repairs with testing. Open full chat

Code Popularity 447

How popular is this code, among other codes? Low

Repair Importance Level

Urgent (Diagnose now) (3 / 3)

Repair Difficulty Level

Advanced (Pro) (3 / 3)

What is this?

Table of contents Created and updated by William Orellana on May 03, 2020

Description
Possible Causes
How To Fix
Cost to Diagnose
FAQs
Comments
Add Comment

💬 Need more help? Ask Coddy for instant answers — it's free!

Code U11D0 Jeep Description

This diagnostic checks for the availability of the Ignition Key Status signal which is sent by the Body Controller Module (BCM) via a Controller Area Network (CAN) message. The Ignition Key Status possible values include the following: 0) Lock, 1) Off, 2) Accessory, 3) Off and Accessory, 4) Run, 5) Start, and 7) Signal Not Available (SNA). The diagnostic checks the signal availability by checking if the received value is not equal to the SNA default value. When the signal is not available, the BCM sends an SNA default value to the Transmission Control Module (TCM). If the TCM reads this value then the Diagnostic Trouble Code (DTC) U11D0 is set.

OBDII Code U11D0 Jeep - Lost Ignition Key Status Message - AutoCodes.com — U11D0 Jeep Code - Lost Ignition Key Status Message

What does this mean?

What are the Possible Causes of the DTC U11D0 Jeep?

Faulty Powertrain Control Module (PCM)
Faulty Body Control Module (BCM)

How to Fix the DTC U11D0 Jeep?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the U11D0 Jeep code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the U11D0 Jeep code?

Need more information on how to fix the U11D0 Jeep code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the U11D0 Jeep code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about U11D0 Jeep Code

1. What does the U11D0 OBDII code for a Jeep mean?

The U11D0 code specifically refers to the Lost Ignition Key Status Message in a Jeep's onboard diagnostic system.

2. What are the common symptoms of a U11D0 code in a Jeep?

Common symptoms of a U11D0 code may include issues with starting the vehicle, loss of key recognition, and potential immobilization of the vehicle.

3. What are the possible causes of a U11D0 code in a Jeep?

Possible causes of a U11D0 code include a faulty ignition key, a problem with the key fob, issues with the ignition switch, or a malfunction in the vehicle's anti-theft system.

4. How can I diagnose a U11D0 code in my Jeep?

Diagnosing a U11D0 code typically involves checking the key fob's battery, ensuring the key is properly programmed, inspecting the ignition system components, and using a professional OBDII scanner for further investigation.

5. Can I still drive my Jeep with a U11D0 code present?

It is not recommended to drive your Jeep if a U11D0 code is present, as it may lead to starting issues or even immobilization of the vehicle while driving.

6. How can I repair a U11D0 code in my Jeep?

To repair a U11D0 code, consider replacing the key fob battery, reprogramming the key, checking and replacing the ignition switch if necessary, or seeking assistance from a professional mechanic for advanced diagnostics.

7. Will resetting the OBDII system clear the U11D0 code in my Jeep?

Resetting the OBDII system may temporarily clear the U11D0 code, but if the underlying issue is not addressed, the code is likely to reappear once the problem resurfaces.

8. Is a U11D0 code a serious problem in a Jeep?

A U11D0 code can be a serious problem in a Jeep, especially if it leads to starting issues or immobilization of the vehicle. It is important to address this code promptly to ensure the safe operation of the vehicle.

9. Can a U11D0 code be triggered by a simple malfunction?

Yes, a U11D0 code can be triggered by a simple malfunction such as a weak key fob battery or a programming error. However, it is crucial to diagnose the specific cause to prevent future occurrences.

10. How can I prevent a U11D0 code from appearing in my Jeep?

To prevent a U11D0 code, regularly maintain your key fob, ensure proper programming of the key, and address any ignition system issues promptly to avoid potential immobilization problems.