AutoCodesJeep – U11CB Jeep

U11CB Jeep Code - Lost Left Rear Wheel Speed Message

Quick Answer

This diagnostic checks the availability of the left rear wheel speed signal which is sent by the Electronic Stability Program (ESP) via a Controller Area Network (CAN) message. Common causes include Faulty Powertrain Control Module (PCM), Faulty Anti-Lock Brake System (ABS) Module. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means
U11CB Jeep indicates Lost Left Rear Wheel Speed Message.
Common causes
Common causes include Faulty Powertrain Control Module (PCM), Faulty Anti-Lock Brake System (ABS) Module.
Severity
High - diagnose this code as soon as possible.
Can I drive?
Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
AI answers can be wrong. Verify repairs with testing. Open full chat
Code Popularity 471
How popular is this code, among other codes? Low
Table of contents Created and updated by William Orellana on May 03, 2020
💬 Need more help? Ask Coddy for instant answers — it's free!

Code U11CB Jeep Description

This diagnostic checks the availability of the left rear wheel speed signal which is sent by the Electronic Stability Program (ESP) via a Controller Area Network (CAN) message. The diagnostic checks the availability by checking the valid bit. When the signal is not available, the ESP sends a Signal Not Available (SNA) default value to the Transmission Control Module (TCM). If the TCM reads this value then the Diagnostic Trouble Code (DTC) U11CB is set.
OBDII Code U11CB Jeep - Lost Left Rear Wheel Speed Message - AutoCodes.com
U11CB Jeep Code - Lost Left Rear Wheel Speed Message

What are the Possible Causes of the DTC U11CB Jeep?

  • Faulty Powertrain Control Module (PCM)
  • Faulty Anti-Lock Brake System (ABS) Module

How to Fix the DTC U11CB Jeep?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the U11CB Jeep code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the U11CB Jeep code?

Need more information on how to fix the U11CB Jeep code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the U11CB Jeep code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about U11CB Jeep Code

1. What does the OBDII code U11CB mean on a Jeep?

The U11CB code indicates a lost communication message from the left rear wheel speed sensor to the vehicle’s control modules.

2. What are the symptoms of the U11CB code on a Jeep?

Symptoms may include the ABS light or traction control light illuminating, reduced traction control functionality, or intermittent braking issues.

3. What causes the U11CB code on a Jeep?

Common causes include a faulty left rear wheel speed sensor, damaged wiring or connectors, or a malfunction in the ABS control module.

4. Can I drive my Jeep with the U11CB code?

While the Jeep may still be drivable, safety features like ABS and traction control may be compromised, making driving conditions riskier, especially on slippery roads.

5. How do I diagnose the U11CB code on a Jeep?

Start by inspecting the left rear wheel speed sensor, its wiring, and connectors for damage or corrosion. Use a scan tool to confirm the code and check live data from the sensor.

6. How do I fix the U11CB code on a Jeep?

Repairs may involve replacing the left rear wheel speed sensor, repairing damaged wiring, cleaning corroded connectors, or updating/reprogramming the ABS module.

7. How much does it cost to fix the U11CB code on a Jeep?

The repair cost can vary but typically ranges from $100 to $300, depending on whether you need a new sensor or wiring repairs.

8. Can a U11CB code be triggered by a dead battery?

Yes, a weak or dead battery can cause communication errors like the U11CB code, though this is less common.

9. How often do wheel speed sensors fail on Jeeps?

Wheel speed sensors can fail due to wear and tear, exposure to debris, or corrosion, typically after several years or tens of thousands of miles.

10. Will clearing the U11CB code fix the problem?

Clearing the code with a scan tool will not fix the underlying issue. Proper diagnosis and repair of the root cause are required to prevent the code from returning.

Discuss the causes and fixes for U11CB Jeep OBDII Code

Code U11CB Jeep comments

No comments found for this page.

AutoCodes App

Fix Your Car Smarter

Try the New AutoCodes App!

Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.

AutoCodes App on Google Play