AutoCodes – Dodge – U11CB Dodge

U11CB Dodge Code - Lost Left Rear Wheel Speed Message

Quick Answer

This diagnostic checks the availability of the left rear wheel speed signal which is sent by the Electronic Stability Program (ESP) via a Controller Area Network (CAN) message. Common causes include Faulty Powertrain Control Module (PCM), Faulty Anti-Lock Brake System (ABS) Module. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means
U11CB Dodge indicates Lost Left Rear Wheel Speed Message.
Common causes
Common causes include Faulty Powertrain Control Module (PCM), Faulty Anti-Lock Brake System (ABS) Module.
Severity
High - diagnose this code as soon as possible.
Can I drive?
Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
AI answers can be wrong. Verify repairs with testing. Open full chat
Code Popularity 990
How popular is this code, among other codes? Low
Table of contents Created and updated by William Orellana on May 03, 2020
πŸ’¬ Need more help? Ask Coddy for instant answers β€” it's free!

Code U11CB Dodge Description

This diagnostic checks the availability of the left rear wheel speed signal which is sent by the Electronic Stability Program (ESP) via a Controller Area Network (CAN) message. The diagnostic checks the availability by checking the valid bit. When the signal is not available, the ESP sends a Signal Not Available (SNA) default value to the Transmission Control Module (TCM). If the TCM reads this value then the Diagnostic Trouble Code (DTC) U11CB is set.
OBDII Code U11CB Dodge - Lost Left Rear Wheel Speed Message - AutoCodes.com
U11CB Dodge Code - Lost Left Rear Wheel Speed Message

What are the Possible Causes of the DTC U11CB Dodge?

  • Faulty Powertrain Control Module (PCM)
  • Faulty Anti-Lock Brake System (ABS) Module

How to Fix the DTC U11CB Dodge?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the U11CB Dodge code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the U11CB Dodge code?

Need more information on how to fix the U11CB Dodge code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the U11CB Dodge code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about U11CB Dodge Code

1. What does the OBDII code U11CB mean on a Dodge vehicle?

U11CB indicates a communication error where the vehicle's system has lost the signal from the left rear wheel speed sensor.

2. What are the common symptoms of the U11CB code on a Dodge?

Symptoms may include ABS or traction control warning lights, erratic speedometer readings, or impaired ABS and traction control system functionality.

3. What causes the U11CB code to appear?

This code can be caused by a faulty left rear wheel speed sensor, damaged wiring or connectors, or a malfunction in the ABS module.

4. Can I drive my Dodge with the U11CB code active?

While the vehicle may still be drivable, safety features like ABS and traction control may not function properly, increasing the risk of losing control in slippery conditions.

5. How can I diagnose the U11CB code on my Dodge?

Start by inspecting the left rear wheel speed sensor and its wiring for damage or corrosion, then use a scan tool to monitor sensor data and verify communication with the ABS module.

6. How do I fix the U11CB code on my Dodge?

Repairs may involve replacing the left rear wheel speed sensor, repairing damaged wiring or connectors, or reprogramming/updating the ABS module.

7. How much does it cost to fix the U11CB code?

Repair costs vary but typically range from $150 to $400, depending on whether the sensor or wiring needs replacement.

8. Can a dirty wheel speed sensor trigger the U11CB code?

Yes, dirt or debris on the sensor or reluctor wheel can prevent proper signal transmission and trigger the code.

9. Will clearing the U11CB code fix the issue?

Clearing the code without addressing the underlying problem will only temporarily remove the warning, and the code will likely return.

10. Do I need special tools to fix the U11CB code on my Dodge?

A scan tool capable of reading ABS data is helpful for diagnosis, and basic tools may be required for sensor or wiring repairs.

Discuss the causes and fixes for U11CB Dodge OBDII Code

Code U11CB Dodge comments

No comments found for this page.

AutoCodes App

Fix Your Car Smarter

Try the New AutoCodes App!

Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.

AutoCodes App on Google Play