AutoCodesJeep – U11C9 Jeep

U11C9 Jeep Code - Lost Left Front Wheel Speed Message

Quick Answer

This diagnostic checks the availability of the left front wheel speed signal which is sent by the Electronic Stability Program (ESP) via a Controller Area Network (CAN) message. Common causes include Faulty Powertrain Control Module (PCM), Faulty Anti-Lock Brake System (ABS) Module. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means
U11C9 Jeep indicates Lost Left Front Wheel Speed Message.
Common causes
Common causes include Faulty Powertrain Control Module (PCM), Faulty Anti-Lock Brake System (ABS) Module.
Severity
High - diagnose this code as soon as possible.
Can I drive?
Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
AI answers can be wrong. Verify repairs with testing. Open full chat
Code Popularity 576
How popular is this code, among other codes? Low
Table of contents Created and updated by William Orellana on May 03, 2020
💬 Need more help? Ask Coddy for instant answers — it's free!

Code U11C9 Jeep Description

This diagnostic checks the availability of the left front wheel speed signal which is sent by the Electronic Stability Program (ESP) via a Controller Area Network (CAN) message. The diagnostic checks the availability by checking the valid bit. The Diagnostic Trouble Code (DTC) sets when the read value does not match the written value in any RAM location.
OBDII Code U11C9 Jeep - Lost Left Front Wheel Speed Message - AutoCodes.com
U11C9 Jeep Code - Lost Left Front Wheel Speed Message

What are the Possible Causes of the DTC U11C9 Jeep?

  • Faulty Powertrain Control Module (PCM)
  • Faulty Anti-Lock Brake System (ABS) Module

How to Fix the DTC U11C9 Jeep?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the U11C9 Jeep code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the U11C9 Jeep code?

Need more information on how to fix the U11C9 Jeep code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the U11C9 Jeep code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about U11C9 Jeep Code

1. What does the OBDII code U11C9 mean on a Jeep?

The U11C9 code indicates a "Lost Left Front Wheel Speed Message," meaning the vehicle's communication system is not receiving data from the left front wheel speed sensor.

2. What are the common symptoms of the U11C9 code on a Jeep?

Symptoms can include ABS or traction control lights illuminating, loss of ABS or traction control functionality, and erratic speedometer readings.

3. What causes the U11C9 code to appear in a Jeep?

The code is usually caused by a faulty left front wheel speed sensor, damaged wiring or connectors, or a malfunctioning ABS module.

4. Can I still drive my Jeep with the U11C9 code?

While the vehicle may still be drivable, safety features like ABS and traction control may be compromised, so it’s best to address the issue promptly.

5. How do I diagnose the U11C9 code on a Jeep?

Start by inspecting the left front wheel speed sensor and its wiring for damage or corrosion. Use a scan tool to check for additional codes and verify sensor data.

6. How do I fix the U11C9 code on my Jeep?

Repairs may include replacing the left front wheel speed sensor, repairing or replacing damaged wiring, or reprogramming or replacing the ABS module if necessary.

7. How much does it cost to fix the U11C9 code on a Jeep?

The cost can vary, but replacing a wheel speed sensor typically costs $100–$300, including parts and labor. Wiring repairs or module replacements may cost more.

8. Can a dirty wheel speed sensor cause the U11C9 code?

Yes, dirt or debris on the sensor can interfere with its readings, potentially triggering the code. Cleaning the sensor may resolve the issue.

9. Will clearing the U11C9 code with a scan tool fix the problem?

Clearing the code may temporarily turn off the warning light, but if the underlying issue isn’t fixed, the code will return.

10. Can a faulty ABS module cause the U11C9 code?

Yes, a malfunctioning ABS module can fail to process the wheel speed sensor data, leading to the U11C9 code. However, this is less common than sensor or wiring issues.

Discuss the causes and fixes for U11C9 Jeep OBDII Code

Code U11C9 Jeep comments

No comments found for this page.

AutoCodes App

Fix Your Car Smarter

Try the New AutoCodes App!

Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.

AutoCodes App on Google Play