U11C6 Chrysler Code - Lost Engine Torque Request Message
Quick Answer
This diagnostic determines the availability of the static indicated engine torque signal, the engine friction torque signal, and the indicated driver torque request signal sent by the Powertrain Control Module (PCM) via two Controller Area Network (CAN) messages. Common causes include Faulty Transmission Control Module (TCM), Transmission Control Module harness is open or shorted, Transmission Control Module circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- U11C6 Chrysler indicates Lost Engine Torque Request Message.
- Common causes
- Common causes include Faulty Transmission Control Module (TCM), Transmission Control Module harness is open or shorted, Transmission Control Module circuit poor electrical connection.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code U11C6 Chrysler Description
What are the Possible Causes of the DTC U11C6 Chrysler?
- Faulty Transmission Control Module (TCM)
- Transmission Control Module harness is open or shorted
- Transmission Control Module circuit poor electrical connection
How to Fix the DTC U11C6 Chrysler?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the U11C6 Chrysler code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the U11C6 Chrysler code?
Need more information on how to fix the U11C6 Chrysler code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the U11C6 Chrysler code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about U11C6 Chrysler Code
1. What are the common symptoms of OBDII code U11C6 (Chrysler) - Lost Engine Torque Request Message?
- Common symptoms include reduced engine performance, hesitation or stalling, and illuminated Check Engine light.
2. What could cause the OBDII code U11C6 (Chrysler) to be triggered?
- The code U11C6 is typically triggered by communication issues between control modules, faulty wiring, or a malfunctioning engine control module.
3. How can I diagnose the U11C6 code related to the Lost Engine Torque Request Message?
- Diagnose the code by conducting a thorough inspection of the wiring harness, checking for loose connections, and using a diagnostic scan tool to identify communication errors.
4. Are there any specific repair tips for resolving the U11C6 code on a Chrysler vehicle?
- Repair tips include checking and repairing any damaged wiring, ensuring proper connections between control modules, and reprogramming or replacing the engine control module if necessary.
5. Can a DIY enthusiast address the U11C6 code issue, or is professional help required?
- While some basic checks like inspecting wiring connections can be done by DIY enthusiasts, resolving the U11C6 code may require advanced diagnostic tools and expertise, making professional help advisable.
6. Is it safe to continue driving with the U11C6 code triggered on a Chrysler vehicle?
- It is not recommended to continue driving with the U11C6 code triggered, as it can lead to further engine performance issues and potential safety hazards.
7. How much does it typically cost to repair the U11C6 code on a Chrysler vehicle?
- The cost of repairing the U11C6 code can vary depending on the exact cause of the issue, but it may involve expenses for diagnostic services, parts replacement, and labor costs.
8. Can resetting the OBDII system clear the U11C6 code temporarily?
- Resetting the OBDII system may temporarily clear the U11C6 code, but if the underlying issue is not addressed, the code is likely to reappear once the problem resurfaces.
9. Are there any preventive measures to avoid encountering the U11C6 code in the future?
- To prevent the U11C6 code from recurring, regular vehicle maintenance, including checking wiring integrity and ensuring proper control module communication, can be beneficial.
10. Does the U11C6 code affect vehicle safety, or is it solely an engine performance issue?
- While the U11C6 code primarily affects engine performance, unresolved communication issues between control modules can potentially impact overall vehicle safety and functionality.
Discuss the causes and fixes for U11C6 Chrysler OBDII Code
Code U11C6 Chrysler comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
