U11C3 Jeep Code - ESM Lost Communication With TCM On DPT CAN
Quick Answer
The Electronic Shift Module (ESM) communicates with other controllers on the Controller Area Network (CAN) Dedicated Powertrain (DPT) bus. Common causes include Faulty Transmission Control Module (TCM), Transmission Control Module (TCM) harness is open or shorted, Transmission Control Module (TCM) circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- U11C3 Jeep indicates ESM Lost Communication With TCM On DPT CAN.
- Common causes
- Common causes include Faulty Transmission Control Module (TCM), Transmission Control Module (TCM) harness is open or shorted, Transmission Control Module (TCM) circuit poor electrical connection.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code U11C3 Jeep Description
What are the Possible Causes of the DTC U11C3 Jeep?
- Faulty Transmission Control Module (TCM)
- Transmission Control Module (TCM) harness is open or shorted
- Transmission Control Module (TCM) circuit poor electrical connection
- Faulty Electronic Shift Module (ESM)
How to Fix the DTC U11C3 Jeep?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the U11C3 Jeep code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the U11C3 Jeep code?
Need more information on how to fix the U11C3 Jeep code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the U11C3 Jeep code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about U11C3 Jeep Code
1. What does the OBDII code U11C3 Jeep mean?
The code U11C3 indicates that the Electronic Shift Module (ESM) has lost communication with the Transmission Control Module (TCM) on the Dual Port Transmission Controller Area Network (DPT CAN).
2. What are the common symptoms of U11C3 code in a Jeep?
Common symptoms of the U11C3 code may include issues with shifting gears, transmission not engaging properly, dashboard warning lights such as the Check Engine Light or Transmission Warning Light, and possible limp mode activation.
3. What are the possible causes of the U11C3 code in a Jeep?
Possible causes of the U11C3 code include faulty wiring or connectors in the communication network between the ESM and TCM, a malfunctioning ESM or TCM, software issues, or a problem with the CAN bus system.
4. How can I diagnose the U11C3 code in my Jeep?
Diagnosing the U11C3 code typically involves using a diagnostic scanner to retrieve the code and inspecting the wiring, connectors, and components related to the ESM and TCM. Checking for any loose connections or damage is crucial in identifying the issue.
5. How can I repair the U11C3 code in my Jeep?
To repair the U11C3 code, you may need to address any wiring or connector issues, replace a faulty ESM or TCM if necessary, update software as recommended by the manufacturer, and clear the error code from the system.
6. Can I still drive my Jeep with the U11C3 code present?
It is not recommended to drive your Jeep with the U11C3 code present, as it may lead to transmission issues and potential safety hazards. It is advisable to address the problem promptly to prevent further damage.
7. How much does it cost to fix the U11C3 code in a Jeep?
The cost of fixing the U11C3 code can vary depending on the underlying cause of the issue. It may range from a simple wiring repair to replacing a component like the ESM or TCM, so it is best to consult with a professional for an accurate estimate.
8. Can the U11C3 code be intermittent?
Yes, the U11C3 code can be intermittent, meaning that the communication loss between the ESM and TCM may occur sporadically. It is essential to address intermittent issues promptly to prevent any long-term damage.
9. Will disconnecting the battery reset the U11C3 code?
Disconnecting the battery may reset the U11C3 code temporarily, but if the underlying issue causing the communication loss between the ESM and TCM is not addressed, the code is likely to reappear. It is recommended to diagnose and repair the problem to prevent recurrence.
10. Is the U11C3 code specific to Jeep vehicles?
The U11C3 code related to ESM lost communication with TCM on DPT CAN is specific to Jeep vehicles equipped with this particular communication network setup. Other vehicle makes and models may have similar but different codes for communication issues between modules.
Discuss the causes and fixes for U11C3 Jeep OBDII Code
Code U11C3 Jeep comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
