U11B0 Code - Lost Communication With Right Side Satellite Impact Sensor 4
|U11B0 code possible causes
- Faulty Right Side Satellite Impact Sensor 4
- Right Side Satellite Impact Sensor 4 harness is open or shorted
- Right Side Satellite Impact Sensor 4 circuit poor electrical connection
- Faulty Occupant Restraint Controller (ORC)
|How do I fix the U11B0 code?Check the "Possible Causes" listed above. Visually inspect the related wiring harness and connectors. Check for damaged components and look for broken, bent, pushed out, or corroded connector's pins.
|Cost of diagnosing the U11B0 code
Labor: 1.0The cost of diagnosing the U11B0 code is 1.0 hour of labor. The auto repair's diagnosis time and labor rates vary by location, vehicle's make and model, and even your engine type. Most auto repair shops charge between $75 and $150 per hour.
|What are U11B0 code possible symptoms?
- Engine Light ON (or Service Engine Soon Warning Light)
|U11B0 code descriptionThe impact sensors perform their own self-test using power supplied by the Occupant Restraint Controller (ORC) then communicate this status back to the ORC with periodic updates. The repair of this fault condition involves verifying the integrity of the wiring between the ORC and the sensor. This code will set, if the ORC and the Right Side Impact Sensor 4 do not establish and maintain valid data communications. The Diagnostic Trouble Code (DTC) will become Active after the fault has set for 2 to 3 seconds. The DTC will go to Stored after the ORC to Right Side Impact Sensor 4 communication has recovered for 2.5 seconds.
|Need more information with the U11B0 code?Need more information on how to fix the U11B0 code? Get Access to Factory Service Manuals
|U11B0 code information for specific makes
|Need help with a U11B0 code?Get the U11b0 code diagnosed by a professional: Find a repair shop in your area
|U11B0 code commentsHelp us improve AutoCodes.com. Leave a comment below or tell us if the information above helps you fix the code. What are the symptoms on your vehicle for the U11b0 code? Have you replaced any parts?
Any information is appreciated. Thanks