U1196 Code - Invalid Or Missing Data For Door Locks
Quick Answer
Modules connected to the class 2 serial data circuit monitor for serial data communications during normal vehicle operation. Common causes include Faulty Module that is not communicating, Module harness is open or shorted, Module circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- U1196 indicates Invalid Or Missing Data For Door Locks.
- Common causes
- Common causes include Faulty Module that is not communicating, Module harness is open or shorted, Module circuit poor electrical connection.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code U1196 Description
What are the Possible Causes of the DTC U1196?
- Faulty Module that is not communicating
- Module harness is open or shorted
- Module circuit poor electrical connection
How to Fix the DTC U1196?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the U1196 code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80β$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the U1196 code?
Need more information on how to fix the U1196 code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the U1196 code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about U1196 Code
1. What are the common symptoms of OBDII code U1196?
The common symptoms of OBDII code U1196 include issues with the door locks, such as failure to lock or unlock, erratic behavior, or complete malfunction.
2. What can cause the OBDII code U1196 to appear?
The OBDII code U1196, "Invalid Or Missing Data For Door Locks," can be triggered by faulty door lock actuators, damaged wiring, or issues with the central locking system.
3. How can I diagnose the cause of OBDII code U1196?
To diagnose the cause of OBDII code U1196, you can start by checking the door lock actuators, inspecting the wiring for any damage, and scanning the central locking system for any faults using a diagnostic tool.
4. Can I still drive my vehicle with OBDII code U1196?
It is generally safe to drive your vehicle with OBDII code U1196, but it is important to address the underlying issue promptly to avoid potential problems with the door locks.
5. Are there any simple repairs I can try to fix OBDII code U1196?
Some simple repairs you can try to fix OBDII code U1196 include checking and replacing any blown fuses related to the door locks, ensuring the wiring connections are secure, and resetting the central locking system.
6. Is it possible to reset OBDII code U1196 without professional help?
You may be able to reset OBDII code U1196 by disconnecting the car battery for a few minutes to clear the error code. However, if the underlying issue is not addressed, the code may reappear.
7. How much does it typically cost to repair OBDII code U1196?
The cost to repair OBDII code U1196 can vary depending on the cause of the issue. Simple fixes like replacing a fuse may cost less, while replacing a faulty door lock actuator or repairing wiring could be more expensive.
8. Can extreme weather conditions contribute to triggering OBDII code U1196?
Extreme weather conditions, such as extreme heat or cold, can potentially affect the door lock actuators or wiring, which may lead to the triggering of OBDII code U1196.
9. Will fixing OBDII code U1196 improve the overall security of my vehicle?
Fixing OBDII code U1196 related to door locks can help restore the proper functioning of the locking system, which in turn can improve the security of your vehicle by ensuring all doors lock and unlock as intended.
10. How often should I check the door locks to prevent OBDII code U1196 from appearing?
It is a good practice to periodically check the door locks for any issues, such as slow response, unusual sounds, or failure to lock/unlock, to help prevent OBDII code U1196 and ensure the proper functioning of the locking system.
Discuss the causes and fixes for U1196 OBDII Code
Code U1196 comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.