AutoCodes – Jeep – U1148 Jeep

U1148 Jeep Code - Additional CAN-C ECU Detected

Quick Answer

The Diagnostic Trouble Code (DTC) sets when the Totally Integrated Power Module (TIPM) detects an additional Controller Area Network (CAN) C Bus module and requires reprogramming. Common causes include Additional Module Added/Removed From the CAN Interior Bus Network, Faulty Totally Integrated Power Module (TIPM). Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means: U1148 Jeep indicates Additional CAN-C ECU Detected.
Common causes: Common causes include Additional Module Added/Removed From the CAN Interior Bus Network, Faulty Totally Integrated Power Module (TIPM).
Severity: High - diagnose this code as soon as possible.
Can I drive?: Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

Save to My Repairs My Repairs

AI answers can be wrong. Verify repairs with testing. Open full chat

Code Popularity 8,178

How popular is this code, among other codes? Low

Repair Importance Level

Urgent (Diagnose now) (3 / 3)

Repair Difficulty Level

Advanced (Pro) (3 / 3)

What is this?

Table of contents Created and updated by William Orellana on Apr 24, 2020

Description
Possible Causes
How To Fix
Cost to Diagnose
FAQs
Comments
Add Comment

💬 Need more help? Ask Coddy for instant answers — it's free!

Code U1148 Jeep Description

The Diagnostic Trouble Code (DTC) sets when the Totally Integrated Power Module (TIPM) detects an additional Controller Area Network (CAN) C Bus module and requires reprogramming.

OBDII Code U1148 Jeep - Additional CAN-C ECU Detected - AutoCodes.com — U1148 Jeep Code - Additional CAN-C ECU Detected

What does this mean?

What are the Possible Causes of the DTC U1148 Jeep?

Additional Module Added/Removed From the CAN Interior Bus Network
Faulty Totally Integrated Power Module (TIPM)

How to Fix the DTC U1148 Jeep?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the U1148 Jeep code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the U1148 Jeep code?

Need more information on how to fix the U1148 Jeep code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the U1148 Jeep code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about U1148 Jeep Code

1. What does the OBDII code U1148 Jeep mean?

The code U1148 for Jeep indicates that an additional CAN-C ECU has been detected, suggesting a communication error between control modules.

2. What are the common symptoms of OBDII code U1148 in a Jeep?

Common symptoms of code U1148 in a Jeep may include intermittent or permanent loss of communication with certain vehicle systems, dashboard warning lights, and potential drivability issues.

3. What are the possible causes of the U1148 code in a Jeep?

Possible causes of the U1148 code in a Jeep include faulty wiring connections, damaged or corroded wiring harnesses, issues with the CAN-C bus network, or a malfunctioning control module.

4. How can I diagnose the U1148 code in my Jeep?

Diagnosing the U1148 code in a Jeep may involve using a diagnostic scanner to check for other related trouble codes, inspecting the wiring harness for damage, testing the control modules for proper communication, and performing a thorough visual inspection.

5. Can I still drive my Jeep with the U1148 code present?

It is not recommended to drive your Jeep with the U1148 code present, as it may lead to further electrical issues and potential safety hazards. It is advised to address the issue promptly.

6. How can I repair the U1148 code in my Jeep?

Repairing the U1148 code in a Jeep may involve repairing or replacing damaged wiring, ensuring proper connections, resetting the control modules, or seeking assistance from a professional technician for a thorough diagnosis and repair.

7. Could a dead battery cause the U1148 code in a Jeep?

A dead or weak battery could potentially contribute to communication errors and trigger the U1148 code in a Jeep. It is advisable to ensure the battery is in good condition as part of the diagnostic process.

8. Is the U1148 code specific to a certain Jeep model?

The U1148 code can be specific to certain Jeep models and may vary in its interpretation and relevance based on the year, make, and model of the vehicle. Consult a reliable OBDII code database for accurate information.

9. Can resetting the U1148 code make it go away permanently?

Resetting the U1148 code may clear the immediate fault temporarily, but if the underlying issue causing the code is not addressed, it is likely to return. It is essential to diagnose and repair the root cause of the problem.

10. How much does it cost to fix the U1148 code in a Jeep?

The cost of fixing the U1148 code in a Jeep can vary depending on the cause of the issue, the extent of the repairs needed, and labor rates in your area. It is recommended to obtain estimates from reputable repair shops for an accurate cost assessment.