U112D Chrysler Code - Lost Communication With EVIC Steering Wheel Switches
Quick Answer
The Diagnostic Trouble Code (DTC) sets when the Body Control Module (BCM) does not receive Local Interconnect Network (LIN) Bus messages from the Steering Column Control Module (SCCM) for greater than three seconds. Common causes include Faulty Steering Column Control Module (SCCM), Steering Column Control Module harness is open or shorted, Steering Column Control Module circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- U112D Chrysler indicates Lost Communication With EVIC Steering Wheel Switches.
- Common causes
- Common causes include Faulty Steering Column Control Module (SCCM), Steering Column Control Module harness is open or shorted, Steering Column Control Module circuit poor electrical connection.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code U112D Chrysler Description
What are the Possible Causes of the DTC U112D Chrysler?
- Faulty Steering Column Control Module (SCCM)
- Steering Column Control Module harness is open or shorted
- Steering Column Control Module circuit poor electrical connection
How to Fix the DTC U112D Chrysler?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the U112D Chrysler code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the U112D Chrysler code?
Need more information on how to fix the U112D Chrysler code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the U112D Chrysler code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about U112D Chrysler Code
1. What are the common symptoms of OBDII code U112D in a Chrysler vehicle?
Symptoms may include a malfunctioning Electronic Vehicle Information Center (EVIC) display, non-responsive steering wheel switches, and loss of communication with the steering wheel control module.
2. What could cause the OBDII code U112D to appear in a Chrysler vehicle?
The code U112D typically indicates a communication error between the EVIC display and the steering wheel switches, often caused by a faulty steering wheel control module or wiring issues.
3. How can I diagnose the cause of the U112D code in my Chrysler?
To diagnose the U112D code, it is recommended to perform a thorough inspection of the steering wheel control module, check for any loose or damaged wiring connections, and use a diagnostic scanner to retrieve specific error codes.
4. Is it safe to continue driving with the U112D code present in a Chrysler vehicle?
It is not recommended to drive with the U112D code as it may affect the functionality of critical components like the steering wheel switches and EVIC display, potentially compromising the vehicle's safety and performance.
5. Can I reset the U112D code in my Chrysler without fixing the underlying issue?
While you can clear the code temporarily, it is important to address the root cause of the problem to prevent the code from reappearing and ensure the proper functioning of the steering wheel controls.
6. How much does it typically cost to repair the U112D code in a Chrysler vehicle?
The cost of repairing the U112D code can vary depending on the specific issue causing the communication error, ranging from a few hundred dollars for wiring repairs to over a thousand dollars for a new steering wheel control module.
7. Are there any DIY repair tips for fixing the U112D code in a Chrysler?
DIY enthusiasts with automotive repair experience may attempt to inspect and repair wiring connections, replace the steering wheel control module, or reset the EVIC system to potentially resolve the U112D code.
8. Can extreme weather conditions contribute to triggering the U112D code in a Chrysler vehicle?
Yes, extreme temperature fluctuations or moisture exposure can sometimes lead to electrical issues causing the U112D code, making it important to protect the steering wheel control components from environmental factors.
9. Will replacing the steering wheel switches alone resolve the U112D code in a Chrysler?
While replacing the steering wheel switches may help in some cases, it is crucial to diagnose the specific cause of the communication error to determine if additional repairs or replacements are necessary to clear the U112D code.
10. How long does it typically take to repair the U112D code in a Chrysler at a professional auto repair shop?
The repair time for the U112D code can vary depending on the complexity of the issue and availability of parts, but it generally takes a few hours to a full day for a qualified technician to diagnose and fix the communication error.
Discuss the causes and fixes for U112D Chrysler OBDII Code
Code U112D Chrysler comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
