AutoCodes – Generic – U1114

U1114 Code - Lost Communication with Main Switch Module

Quick Answer

The Controller Area Network (CAN) is a standard bus system in vehicles that enables the connection of automotive devices without the need for a host computer. Common causes include Faulty Controller Area Network (CAN) Communication System, Faulty Main Switch Module, Main Switch Module harness is open or shorted. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means: U1114 indicates Lost Communication with Main Switch Module.
Common causes: Common causes include Faulty Controller Area Network (CAN) Communication System, Faulty Main Switch Module, Main Switch Module harness is open or shorted.
Severity: High - diagnose this code as soon as possible.
Can I drive?: Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

Save to My Repairs My Repairs

AI answers can be wrong. Verify repairs with testing. Open full chat

Code Popularity 13,960

How popular is this code, among other codes? Low

Repair Importance Level

Urgent (Diagnose now) (3 / 3)

Repair Difficulty Level

Advanced (Pro) (3 / 3)

What is this?

Table of contents Created and updated by William Orellana on Mar 28, 2023

Description
Possible Causes
How To Fix
Tech Notes
Cost to Diagnose
Comments
Add Comment

💬 Need more help? Ask Coddy for instant answers — it's free!

Code U1114 Description

The Controller Area Network (CAN) is a standard bus system in vehicles that enables the connection of automotive devices without the need for a host computer. The exchange of operating information and commands among devices is facilitated by pre-programmed information about the required message exchange on the serial data circuits. Communication is carried out using two dedicated wires, known as CAN high and CAN low, with both lines carrying 2.5V when the CAN bus is in idle mode. During the transmission of data bits, the CAN high line increases to 3.75V while the CAN low drops to 1.25V, creating a 2.5V differential between the lines. Since communication relies on a voltage differential between the two bus lines, the CAN bus is NOT sensitive to inductive spikes, electrical fields, or other noise. The Diagnostic Trouble Code (DTC) sets when a periodic message from the Main Switch Module has not been received.

OBDII Code U1114 - Lost Communication with Main Switch Module - AutoCodes.com — U1114 Code - Lost Communication with Main Switch Module

What does this mean?

What are the Possible Causes of the DTC U1114?

Faulty Controller Area Network (CAN) Communication System
Faulty Main Switch Module
Main Switch Module harness is open or shorted
Main Switch Module circuit poor electrical connection

How to Fix the DTC U1114?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What does this mean?

Code Tech Notes

When there are problems with the way different systems in a vehicle communicate with each other using a technology called Controller Area Network (CAN) communication, Diagnostic Trouble Codes (DTC) are displayed. These codes can be caused by issues with the main bus or branch of the communication network, or with the Electronic Control Units (ECUs) and sensors that make up the different systems. If you see code for both the CAN communication problems and internal or power source problems at the same time, you should focus on fixing the internal or power source problems first.

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the U1114 code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the U1114 code?

Need more information on how to fix the U1114 code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the U1114 code diagnosed by a professional: Find a repair shop in your area

Information for Specific Makes

U1114 Chrysler — Lost Communication With Left Front Tire Pressure Trigger Module
U1114 Dodge — Lost Communication With Left Front Tire Pressure Trigger Module
U1114 Jeep — Lost Communication With Left Front Tire Pressure Trigger Module
U1114 Lexus — Lost Communication with Main Switch Module
U1114 RAM — Lost Communication With Left Front Tire Pressure Trigger Module
U1114 Toyota — Lost Communication with Main Switch Module

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.