U1009 LINCOLN Code - SCP Invalid Or Missing Data For Engine Torque
|U1009 LINCOLN code possible causes
- Faulty / intermittent ignition module
- J1850 / SCP Bus wiring intermittently open, shorted to power or ground
- Faulty / intermittent connection at the Powertrain Control Module (PCM)
- Faulty EGR Sensor
|How do I fix the U1009 LINCOLN code?Check the "Possible Causes" listed above. Visually inspect the related wiring harness and connectors. Check for damaged components and look for broken, bent, pushed out, or corroded connector's pins.
|U1009 LINCOLN code tech notesThis is typically an electrical wiring connection issue, either at the engine controller or at the sensors being monitored by the manufacturer.
It can occur if:
The wrong EGR sensor is installed on the vehicle. Verify with the manufacturer for the latest.
A bad ignition module is present.
|Cost of diagnosing the U1009 LINCOLN code
Labor: 1.0The cost of diagnosing the U1009 LINCOLN code is 1.0 hour of labor. The auto repair's diagnosis time and labor rates vary by location, vehicle's make and model, and even your engine type. Most auto repair shops charge between $75 and $150 per hour.
|When is the U1009 LINCOLN code detected?When the PCM is unable to communicate with any other controller on the bus network at any time while the ignition switch is in the “Run” position.
|What are U1009 LINCOLN code possible symptoms?
- Engine Light ON (or Service Engine Soon Warning Light)
- Check Trac Light / ABS Light On
- Bucks at highway speeds
|U1009 LINCOLN code descriptionThis is a manufacturer-specific fault code and can be used for several different faults, depending upon what the manufacturer wants to use it for. The Powertrain Control Module (PCM) communicates over the Serial Communication Protocol (SCP) bus network or J1850 bus. This is a medium-speed bus communication system and is fault-tolerant, which means any type of intermittent/loose connection at these controllers will cause this code to set in memory, but will still operate, provided a data path is available. When the PCM is unable to communicate with any other controller at any time while the ignition switch is turned on, code U1009 will set. This is the typical reason for this code to set.
|Need more information with the U1009 LINCOLN code?Need more information on how to fix the U1009 LINCOLN code?
Get Access to Factory Service Manuals
|Need help with a U1009 LINCOLN code?Get the U1009 Lincoln code diagnosed by a professional: Find a repair shop in your area
|U1009 LINCOLN code commentsHelp us improve AutoCodes.com. Leave a comment below or tell us if the information above helps you fix the code. What are the symptoms on your vehicle for the U1009 Lincoln code? Have you replaced any parts?
Any information is appreciated. Thanks