AutoCodes – Nissan – U1001 2013 Nissan Rogue

U1001 2013 Nissan Rogue Code - Invalid or Missing Data for Primary Id

Quick Answer

The Controller Area Network (CAN) is a serial communication line for real-time applications. Common causes include Controller Area Network (CAN) communication harness is open or shorted, Faulty Engine Control Module (ECM), Poor harness ground connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means: U1001 2013 Nissan Rogue indicates Invalid or Missing Data for Primary Id.
Common causes: Common causes include Controller Area Network (CAN) communication harness is open or shorted, Faulty Engine Control Module (ECM), Poor harness ground connection.
Severity: High - diagnose this code as soon as possible.
Can I drive?: Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

Save to My Repairs My Repairs

AI answers can be wrong. Verify repairs with testing. Open full chat

Code Popularity 4,106

How popular is this code, among other codes? Low

Repair Importance Level

Urgent (Diagnose now) (3 / 3)

Repair Difficulty Level

Advanced (Pro) (3 / 3)

What is this?

Table of contents Created and updated by William Orellana on Apr 15, 2020

Description
Possible Causes
How To Fix
Tech Notes
Cost to Diagnose
FAQs
Comments
Add Comment

💬 Need more help? Ask Coddy for instant answers — it's free!

Code U1001 2013 Nissan Rogue Description

The Controller Area Network (CAN) is a serial communication line for real-time applications. It is an on-vehicle multiplex communication line with high data communication speed and excellent error detection ability. Many electronic control units are equipped onto a vehicle, and each control unit shares information and links with other control units during operation (not independent). In CAN communication, control units are connected with 2 communication lines (CAN H line, CAN L line) allowing a high rate of information transmission with less wiring.
Each control unit transmits/receives data but selectively reads the required data only.
The Diagnostic Trouble Code (DTC) sets when the Engine Control Module (ECM) is not transmitting or receiving CAN communication signals of OBD (emission-related diagnosis) for 2 seconds or more.

OBDII Code U1001 2013 Nissan Rogue - Invalid or Missing Data for Primary Id - AutoCodes.com — U1001 2013 Nissan Rogue Code - Invalid or Missing Data for Primary Id

What does this mean?

What are the Possible Causes of the DTC U1001 2013 Nissan Rogue?

Controller Area Network (CAN) communication harness is open or shorted
Faulty Engine Control Module (ECM)
Poor harness ground connection.

How to Fix the DTC U1001 2013 Nissan Rogue?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What does this mean?

Code Tech Notes

Nissan has released service bulletins for this problem. A common cause with Nissan vehicles is the poor harness ground connection at the engine compartment and the ground connection behind the dash. Clean and resecure harness ground connection and reset engine light.

See U1000 code

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the U1001 2013 Nissan Rogue code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the U1001 2013 Nissan Rogue code?

Need more information on how to fix the U1001 2013 Nissan Rogue code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the U1001 2013 Nissan Rogue code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about U1001 2013 Nissan Rogue Code

1. What does the OBDII code U1001 on a 2013 Nissan Rogue mean?

The U1001 code indicates Invalid or Missing Data for Primary Id communication issue between the engine control module and the transmission control module.

2. What are the common symptoms of the U1001 code in a 2013 Nissan Rogue?

Common symptoms include issues with shifting gears, hesitation or jerking during acceleration, and the vehicle going into limp mode.

3. What are the possible causes of the U1001 code in a 2013 Nissan Rogue?

Potential causes include damaged wiring or connectors, faulty transmission control module, software glitches, or a malfunctioning engine control module.

4. How do you diagnose the U1001 code in a 2013 Nissan Rogue?

Diagnosis involves using an OBDII scanner to retrieve the code, inspecting the wiring and connectors for any visible damage, and performing a thorough check of the transmission and engine control modules.

5. Can I still drive my 2013 Nissan Rogue with the U1001 code present?

It is not recommended to drive the vehicle with the U1001 code as it can lead to further damage and safety risks. It is best to address the issue promptly.

6. How do you repair the U1001 code in a 2013 Nissan Rogue?

Repair options may include repairing or replacing damaged wiring, fixing faulty connectors, reprogramming the control modules, or replacing the affected module.

7. Can the U1001 code in a 2013 Nissan Rogue be fixed at home?

While some simple causes like loose connectors can be addressed at home, diagnosing and repairing complex issues associated with the U1001 code may require professional assistance.

8. How much does it cost to fix the U1001 code in a 2013 Nissan Rogue?

The cost of fixing the U1001 code can vary depending on the root cause of the issue, the extent of the repair needed, and labor rates in your area. It is advisable to get a few quotes from reputable mechanics.

9. How long does it take to repair the U1001 code in a 2013 Nissan Rogue?

The repair time for the U1001 code can vary based on the specific issue, availability of parts, and the expertise of the mechanic. It is best to consult with a professional for a more accurate estimation.

10. Will resetting the trouble codes make the U1001 code disappear in a 2013 Nissan Rogue?

Resetting the trouble codes may temporarily clear the U1001 code, but if the underlying issue is not addressed, the code is likely to reappear. It is crucial to diagnose and fix the root cause of the problem.