AutoCodes
 
OBDII Code List
 
U1001 2012 NISSAN SENTRA

U1001 2012 NISSAN SENTRA - Invalid or Missing Data for Primary Id

Repair Importance Level: 3/3
Repair Difficulty Level: 3/3   
Comments  |  Add Comment

U1001 2012 NISSAN SENTRA Possible Causes

  • Harness or connectors (CAN communication line is open or shorted)
  • ECM

First diagnose U1001 2012 NISSAN SENTRA code

    Check the "Possible Causes" listed above. Visually inspect the related wiring harness and connectors. Check for damaged components and look for broken, bent, pushed out, or corroded terminals.

U1001 2012 NISSAN SENTRA Tech Notes

Usually the problem is poor harness ground connection. The service bulletin suggests cleaning engine and body harness ground connection to repair problem. Loosen the the ground connectors clean them with sand paper on the connector side and body side and retighen the bolts back.


There is a service bulletin for the following Nissan models with U1000 and U1001 code which are all similar:

Nissan Factory Service Bulletin Code U1000

Cost of diagnosing the U1001 2012 NISSAN SENTRA code

    Labor: 1.0

    The cost of diagnosing the U1001 2012 NISSAN SENTRA code is 1.0 hour of labor. The auto repair labor rates vary by location, your vehicle's make and model, and even your engine type. Most auto repairs shops charge between $75 and $150 per hour.

When is the U1001 2012 NISSAN SENTRA code detected?

When ECM is not transmitting or receiving CAN communication signal of OBD (emission related diagnosis) for 2 seconds or more.

U1001 2012 NISSAN SENTRA Possible Symptoms

  • Engine Light ON (or Service Engine Soon Warning Light)

U1001 2012 Nissan Sentra Description

CAN (Controller Area Network) is a serial communication line for real time application. It is an on-vehicle multiplex communication line with high data communication speed and excellent error detection ability. Many electronic control units are equipped onto a vehicle, and each control unit shares information and links with other control units during operation (not independent). In CAN communication, control units are connected with 2 communication lines (CAN H line, CAN L line) allowing a high rate of information transmission with less wiring.

Each control unit transmits/receives data but selectively reads required data only.

OBDII Code U1001 2012 Nissan Sentra - Invalid or Missing Data for Primary Id - AutoCodes.com

U1001 2012 NISSAN SENTRA More Information

Need more information on how to fix the U1001 2012 NISSAN SENTRA code?
Get Access to Factory Service Manuals

Need more help?

Get the U1001 2012 Nissan Sentra code diagnosed by a professional: Find a repair shop in your area

Related Information

U1001 2012 NISSAN SENTRA Comments

Help us improve AutoCodes.com. Leave a comment below or tell us if the information above help you fix the code. What are the symptoms on your vehicle for the U1001 2012 Nissan Sentra code? Have you replaced any parts?
Any information is appreciated. Thanks
Top ⇧