AutoCodes
 
OBDII Code List
 
U1001 2011 NISSAN VERSA

U1001 2011 NISSAN VERSA - Invalid or Missing Data for Primary Id

Repair Importance Level: 3/3
Repair Difficulty Level: 3/3   
Comments  |  Add Comment

U1001 2011 NISSAN VERSA Possible Causes

  • Harness or connectors (CAN communication line is open or shorted)
  • ECM

First diagnose U1001 2011 NISSAN VERSA code

    Check the "Possible Causes" listed above. Visually inspect the related wiring harness and connectors. Check for damaged components and look for broken, bent, pushed out, or corroded terminals.

U1001 2011 NISSAN VERSA Tech Notes

Nissan has release service bulletins for this problem see U1000 code. A common cause with Nissan vehicles is the poor harness ground connection at the engine compartment and the ground connection behind the dash. Clean and resecure harness ground connection and reset engine light.

Cost of diagnosing the U1001 2011 NISSAN VERSA code

    Labor: 1.0

    The cost of diagnosing the U1001 2011 NISSAN VERSA code is 1.0 hour of labor. The auto repair labor rates vary by location, your vehicle's make and model, and even your engine type. Most auto repairs shops charge between $75 and $150 per hour.

When is the U1001 2011 NISSAN VERSA code detected?

When ECM is not transmitting or receiving CAN communication signal of OBD (emission related diagnosis) for 2 seconds or more.

U1001 2011 NISSAN VERSA Possible Symptoms

  • Engine Light ON (or Service Engine Soon Warning Light)

U1001 2011 Nissan Versa Description

CAN (Controller Area Network) is a serial communication line for real time application. It is an on-vehicle multiplex communication line with high data communication speed and excellent error detection ability. Many electronic control units are equipped onto a vehicle, and each control unit shares information and links with other control units during operation (not independent). In CAN communication, control units are connected with 2 communication lines (CAN H line, CAN L line) allowing a high rate of information transmission with less wiring.

Each control unit transmits/receives data but selectively reads required data only.

OBDII Code U1001 2011 Nissan Versa - Invalid or Missing Data for Primary Id - AutoCodes.com

U1001 2011 NISSAN VERSA More Information

Need more information on how to fix the U1001 2011 NISSAN VERSA code?
Get Access to Factory Service Manuals

Need more help?

Get the U1001 2011 Nissan Versa code diagnosed by a professional: Find a repair shop in your area

Related Information

U1001 2011 NISSAN VERSA Comments

Help us improve AutoCodes.com. Leave a comment below or tell us if the information above help you fix the code. What are the symptoms on your vehicle for the U1001 2011 Nissan Versa code? Have you replaced any parts?
Any information is appreciated. Thanks
Top ⇧