U1001 2011 NISSAN SENTRA - Invalid or Missing Data for Primary Id
- Harness or connectors (CAN communication line is open or shorted)
Tech notesUsually the problem is poor harness ground connection. The service bulletin suggests cleaning engine and body harness ground connection to repair problem. Loosen the the ground connectors clean them with sand paper on the connector side and body side and retighen the bolts back.
There is a service bulletin for the following Nissan models with U1000 and U1001 code which are all similar:
Nissan Factory Service Bulletin Code U1000
When is the code detected?When ECM is not transmitting or receiving CAN communication signal of OBD (emission related diagnosis) for 2 seconds or more.
- Engine Light ON (or Service Engine Soon Warning Light)
U1001 2011 Nissan Sentra DescriptionCAN (Controller Area Network) is a serial communication line for real time application. It is an on-vehicle multiplex communication line with high data communication speed and excellent error detection ability. Many electronic control units are equipped onto a vehicle, and each control unit shares information and links with other control units during operation (not independent). In CAN communication, control units are connected with 2 communication lines (CAN H line, CAN L line) allowing a high rate of information transmission with less wiring.
Each control unit transmits/receives data but selectively reads required data only.
Need more help?Get the U1001 2011 Nissan Sentra code diagnosed by a professional: Find a repair shop in your area
U1001 2011 NISSAN SENTRA CommentsHelp us improve AutoCodes.com. Leave a comment below or tell us if the information above help you fix the code. What are the symptoms on your vehicle for the U1001 2011 Nissan Sentra code? Have you replaced any parts?
Any information is appreciated. Thanks