AutoCodes – GMC – U0301 GMC

U0301 GMC Code - Software Incompatibility With Engine Control Module

Quick Answer

Some devices must be configured with specific software, serial numbers, vehicle options, or other information. Common causes include Engine Control Module (ECM) Programmed With Incorrect Software, Faulty Engine Control Module (ECM). Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means: U0301 GMC indicates Software Incompatibility With Engine Control Module.
Common causes: Common causes include Engine Control Module (ECM) Programmed With Incorrect Software, Faulty Engine Control Module (ECM).
Severity: High - diagnose this code as soon as possible.
Can I drive?: Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

Save to My Repairs My Repairs

AI answers can be wrong. Verify repairs with testing. Open full chat

Code Popularity 910

How popular is this code, among other codes? Low

Repair Importance Level

Urgent (Diagnose now) (3 / 3)

Repair Difficulty Level

Advanced (Pro) (3 / 3)

What is this?

Table of contents Created and updated by William Orellana on Apr 07, 2020

Description
Possible Causes
How To Fix
Cost to Diagnose
FAQs
Comments
Add Comment

💬 Need more help? Ask Coddy for instant answers — it's free!

Code U0301 GMC Description

Some devices must be configured with specific software, serial numbers, vehicle options, or other information. If a device was not properly configured after installation that the device may set the appropriate communication Diagnostic Trouble Code (DTC)s. No external circuit diagnosis is involved. The DTC sets when the Engine Control Module (ECM) is not configured properly.

OBDII Code U0301 GMC - Software Incompatibility With Engine Control Module - AutoCodes.com — U0301 GMC Code - Software Incompatibility With Engine Control Module

What does this mean?

What are the Possible Causes of the DTC U0301 GMC?

Engine Control Module (ECM) Programmed With Incorrect Software
Faulty Engine Control Module (ECM)

How to Fix the DTC U0301 GMC?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the U0301 GMC code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the U0301 GMC code?

Need more information on how to fix the U0301 GMC code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the U0301 GMC code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about U0301 GMC Code

1. What does the OBDII code U0301 for a GMC mean?

The U0301 code indicates a software incompatibility issue with the Engine Control Module (ECM).

2. What are the common symptoms of OBDII code U0301 in a GMC vehicle?

Common symptoms include engine stalling, rough idling, decreased fuel efficiency, and in some cases, the vehicle may not start.

3. What are the possible causes of the U0301 code in a GMC?

The U0301 code can be triggered by a faulty ECM, outdated software, wiring issues, or a failed software update.

4. How can I diagnose the U0301 code in my GMC?

Diagnosing the U0301 code typically involves using an OBDII scanner to read the code and checking for any related software updates or issues with the ECM.

5. Can I still drive my GMC with the U0301 code present?

It is not recommended to drive your GMC with the U0301 code present, as it can lead to further damage to the engine and other components.

6. How can I repair the U0301 code in my GMC?

Repairing the U0301 code may involve updating the ECM software, checking and repairing any wiring issues, or replacing a faulty ECM.

7. Is it possible to reset the U0301 code in a GMC without repairing the issue?

Resetting the code without addressing the underlying issue is not recommended, as the problem will likely reoccur.

8. Can a software update fix the U0301 code in my GMC?

In some cases, a software update provided by the manufacturer can resolve the U0301 code by addressing the software incompatibility with the ECM.

9. How much does it cost to repair the U0301 code in a GMC?

The cost of repairing the U0301 code can vary depending on the exact cause of the issue and whether any parts need to be replaced. It is recommended to consult a mechanic for an accurate estimate.

10. Will the U0301 code cause my GMC to fail an emissions test?

Yes, the U0301 code can cause your GMC to fail an emissions test, as it indicates a problem with the engine control system that can impact emissions output.