AutoCodes – Ford – U0260 Ford

U0260 Ford Code - Lost Communication With Seat Control Switch Module 'A'

Quick Answer

A Controller Area Network (CAN) is a vehicle bus standard designed to interconnect automotive devices without a host computer. Common causes include Faulty Seat Control Switch Module 'A', Seat Control Switch Module 'A' harness is open or shorted, Seat Control Switch Module 'A' circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means: U0260 Ford indicates Lost Communication With Seat Control Switch Module 'A'.
Common causes: Common causes include Faulty Seat Control Switch Module 'A', Seat Control Switch Module 'A' harness is open or shorted, Seat Control Switch Module 'A' circuit poor electrical connection.
Severity: High - diagnose this code as soon as possible.
Can I drive?: Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

Save to My Repairs My Repairs

AI answers can be wrong. Verify repairs with testing. Open full chat

Code Popularity 922

How popular is this code, among other codes? Low

Repair Importance Level

Urgent (Diagnose now) (3 / 3)

Repair Difficulty Level

Advanced (Pro) (3 / 3)

What is this?

Table of contents Created and updated by William Orellana on Apr 06, 2020

Description
Possible Causes
How To Fix
Cost to Diagnose
FAQs
Comments
Add Comment

💬 Need more help? Ask Coddy for instant answers — it's free!

Code U0260 Ford Description

A Controller Area Network (CAN) is a vehicle bus standard designed to interconnect automotive devices without a host computer. Operating information and commands are exchanged among the devices. The devices have programmed information about what messages are needed to be exchanged on the serial data circuits. CAN bus uses two dedicated wires for communication. The wires are called CAN high and CAN low. When the CAN bus is in idle mode, both lines carry 2.5V. When data bits are being transmitted, the CAN high line goes to 3.75V, and the CAN low drops to 1.25V, thereby generating a 2.5V differential between the lines. Since communication relies on a voltage differential between the two bus lines, the CAN bus is NOT sensitive to inductive spikes, electrical fields, or other noise. The Diagnostic Trouble Code (DTC) sets when a periodic message from the Seat Control Switch Module 'A' has not been received.

OBDII Code U0260 Ford - Lost Communication With Seat Control Switch Module 'A' - AutoCodes.com — U0260 Ford Code - Lost Communication With Seat Control Switch Module 'A'

What does this mean?

What are the Possible Causes of the DTC U0260 Ford?

Faulty Seat Control Switch Module 'A'
Seat Control Switch Module 'A' harness is open or shorted
Seat Control Switch Module 'A' circuit poor electrical connection

How to Fix the DTC U0260 Ford?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the U0260 Ford code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the U0260 Ford code?

Need more information on how to fix the U0260 Ford code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the U0260 Ford code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about U0260 Ford Code

1. What does the OBDII code U0260 mean on a Ford vehicle?

The U0260 code means the vehicle's control module has lost communication with the Seat Control Switch Module 'A'.

2. What are the common symptoms of the U0260 code on a Ford?

Symptoms may include non-responsive seat adjustments, inoperative seat memory functions, or an illuminated check engine light.

3. What causes the U0260 code to appear?

Common causes include a faulty Seat Control Switch Module 'A', damaged wiring or connectors, a blown fuse, or network communication issues in the CAN bus system.

4. Can I still drive my Ford with the U0260 code?

Yes, the vehicle is typically drivable, but features like seat adjustments may not work, which can affect comfort or safety.

5. How do I diagnose the U0260 code on my Ford?

Start by inspecting the wiring and connectors for damage, check the fuses related to the seat control module, and use a scan tool to verify communication with the module.

6. How do I fix the U0260 code?

Repairs may involve replacing damaged wiring, reconnecting loose connectors, replacing blown fuses, or replacing the Seat Control Switch Module 'A' if it's defective.

7. How much does it cost to fix the U0260 code on a Ford?

The cost depends on the issue; wiring repairs may cost $50-$200, while replacing the module could cost $300-$600 or more, including labor.

8. Can a dead battery cause the U0260 code to appear?

Yes, a weak or dead battery can disrupt communication in the CAN bus system, potentially triggering the U0260 code.

9. Do I need a professional to repair the U0260 code on my Ford?

While some basic checks like inspecting fuses and connectors can be done at home, diagnosing and repairing network issues often require professional tools and expertise.

10. What happens if I ignore the U0260 code?

Ignoring the code may lead to continued loss of seat functionality and potential strain on the vehicleâ€™s communication network, which could cause additional issues over time.