AutoCodes – Generic – U0252

U0252 Code - Lost Communication With Lighting Control Module Rear 'B'

Quick Answer

A Controller Area Network (CAN) is a vehicle bus standard designed to interconnect automotive devices without a host computer. Common causes include Faulty Lighting Control Module Rear 'B', Lighting Control Module Rear 'B' harness is open or shorted, Lighting Control Module Rear 'B' circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means: U0252 indicates Lost Communication With Lighting Control Module Rear 'B'.
Common causes: Common causes include Faulty Lighting Control Module Rear 'B', Lighting Control Module Rear 'B' harness is open or shorted, Lighting Control Module Rear 'B' circuit poor electrical connection.
Severity: High - diagnose this code as soon as possible.
Can I drive?: Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

Save to My Repairs My Repairs

AI answers can be wrong. Verify repairs with testing. Open full chat

Code Popularity 16,388

How popular is this code, among other codes? Low

Repair Importance Level

Urgent (Diagnose now) (3 / 3)

Repair Difficulty Level

Advanced (Pro) (3 / 3)

What is this?

Table of contents Created and updated by William Orellana on Apr 04, 2020

Description
Possible Causes
How To Fix
Cost to Diagnose
Comments
Add Comment

💬 Need more help? Ask Coddy for instant answers — it's free!

Code U0252 Description

A Controller Area Network (CAN) is a vehicle bus standard designed to interconnect automotive devices without a host computer. Operating information and commands are exchanged among the devices. The devices have programmed information about what messages are needed to be exchanged on the serial data circuits. CAN bus uses two dedicated wires for communication. The wires are called CAN high and CAN low. When the CAN bus is in idle mode, both lines carry 2.5V. When data bits are being transmitted, the CAN high line goes to 3.75V, and the CAN low drops to 1.25V, thereby generating a 2.5V differential between the lines. Since communication relies on a voltage differential between the two bus lines, the CAN bus is NOT sensitive to inductive spikes, electrical fields, or other noise. The Diagnostic Trouble Code (DTC) sets when a periodic message from the Lighting Control Module Rear 'B' has not been received.

OBDII Code U0252 - Lost Communication With Lighting Control Module Rear 'B' - AutoCodes.com — U0252 Code - Lost Communication With Lighting Control Module Rear 'B'

What does this mean?

What are the Possible Causes of the DTC U0252?

Faulty Lighting Control Module Rear 'B'
Lighting Control Module Rear 'B' harness is open or shorted
Lighting Control Module Rear 'B' circuit poor electrical connection

How to Fix the DTC U0252?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the U0252 code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the U0252 code?

Need more information on how to fix the U0252 code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the U0252 code diagnosed by a professional: Find a repair shop in your area

Information for Specific Makes

U0252 Buick — Lost Communication With Trailer Interface Control Module
U0252 Cadillac — Lost Communication With Trailer Interface Control Module
U0252 Chevrolet — Lost Communication With Trailer Interface Control Module
U0252 GMC — Lost Communication With Trailer Interface Control Module

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.