AutoCodes – Chevrolet – U01A0 2014 Chevrolet Silverado

U01A0 2014 Chevrolet Silverado Code - Lost Communication with Hybrid/EV Battery Interface Control Module 1

Quick Answer

This diagnostic monitors the internal battery communication status between the Hybrid/EV Powertrain Control Module 2 and the Hybrid/EV Battery Interface Control Modules. Common causes include Faulty Hybrid/EV Battery Interface Control Module, Hybrid/EV Battery Interface Control Module harness is open or shorted, Hybrid/EV Battery Interface Control Module circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means: U01A0 2014 Chevrolet Silverado indicates Lost Communication with Hybrid/EV Battery Interface Control Module 1.
Common causes: Common causes include Faulty Hybrid/EV Battery Interface Control Module, Hybrid/EV Battery Interface Control Module harness is open or shorted, Hybrid/EV Battery Interface Control Module circuit poor electrical connection.
Severity: High - diagnose this code as soon as possible.
Can I drive?: Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

Save to My Repairs My Repairs

AI answers can be wrong. Verify repairs with testing. Open full chat

Code Popularity 203

How popular is this code, among other codes? Low

Repair Importance Level

Urgent (Diagnose now) (3 / 3)

Repair Difficulty Level

Advanced (Pro) (3 / 3)

What is this?

Table of contents Created and updated by William Orellana on Jul 21, 2023

Description
Possible Causes
How To Fix
Cost to Diagnose
FAQs
Comments
Add Comment

💬 Need more help? Ask Coddy for instant answers — it's free!

Code U01A0 2014 Chevrolet Silverado Description

This diagnostic monitors the internal battery communication status between the Hybrid/EV Powertrain Control Module 2 and the Hybrid/EV Battery Interface Control Modules. The diagnostic monitors Hybrid/EV Battery Interface Control Modules data availability whenever this private communications bus is active. The communication network between Hybrid/EV Powertrain Control Module 2 and Hybrid/EV Battery Interface Control Modules is in a daisy-chain architecture. Therefore, a break at any point in the communication bus results in a loss of Hybrid/EV Battery Interface Control Modules communication with the Hybrid/EV Powertrain Control Module 2. If any data is received, the diagnostic will report a pass. If no data is received for greater than 4.5 s, the Hybrid/EV Powertrain Control Module 2 will attempt to initiate the Hybrid/EV Battery Interface Control Modules into a communication mode where the Hybrid/EV Battery Interface Control Modules can perform their own internal communication loop back, bypassing the daisy-chain. If this is the first Hybrid/EV Battery Interface Control Module in the daisy-chain that the Hybrid/EV Powertrain Control Module 2 cannot re-establish communication with, this diagnostic will fail. The Diagnostic Trouble Code (DTC) will be set when the Hybrid/EV Powertrain Control Module 2 has not received data from the Hybrid/EV Battery Interface Control Module 1 for more than 4.5 s.

OBDII Code U01A0 2014 Chevrolet Silverado - Lost Communication with Hybrid/EV Battery Interface Control Module 1 - AutoCodes.com — U01A0 2014 Chevrolet Silverado Code - Lost Communication with Hybrid/EV Battery Interface Control Module 1

What does this mean?

What are the Possible Causes of the DTC U01A0 2014 Chevrolet Silverado?

Faulty Hybrid/EV Battery Interface Control Module
Hybrid/EV Battery Interface Control Module harness is open or shorted
Hybrid/EV Battery Interface Control Module circuit poor electrical connection

How to Fix the DTC U01A0 2014 Chevrolet Silverado?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the U01A0 2014 Chevrolet Silverado code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the U01A0 2014 Chevrolet Silverado code?

Need more information on how to fix the U01A0 2014 Chevrolet Silverado code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the U01A0 2014 Chevrolet Silverado code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about U01A0 2014 Chevrolet Silverado Code

1. What are common symptoms of OBDII code U01A0 in a 2014 Chevrolet Silverado?

- Common symptoms include the malfunction indicator light (MIL) illuminating, reduced fuel efficiency, and potential issues with hybrid/EV system performance.

2. What does the OBDII code U01A0 indicate in a 2014 Chevrolet Silverado?

- The code U01A0 signifies a communication error between the vehicle's onboard diagnostic system and the Hybrid/EV Battery Interface Control Module 1.

3. What are possible causes of the U01A0 code in a 2014 Chevrolet Silverado?

- Potential causes include loose or corroded wiring connections, a faulty Hybrid/EV Battery Interface Control Module 1, software issues, or a malfunctioning CAN bus network.

4. How can I diagnose the U01A0 code in my 2014 Chevrolet Silverado?

- Diagnosis typically involves conducting a thorough inspection of the wiring connections, checking for corrosion, testing the Hybrid/EV Battery Interface Control Module 1, and scanning the vehicle's computer for additional fault codes.

5. Can I continue driving my 2014 Chevrolet Silverado with the U01A0 code?

- It is recommended to address the issue as soon as possible to prevent potential damage to the hybrid/EV system. Continuously driving with the code may lead to further complications.

6. How can I reset the U01A0 code in my 2014 Chevrolet Silverado?

- Resetting the code usually involves using an OBDII scanner to clear the diagnostic trouble codes stored in the vehicle's computer. However, it is essential to address the underlying issue causing the code before resetting it.

7. Are there any common repair tips for fixing the U01A0 code in a 2014 Chevrolet Silverado?

- Repair tips may include checking and repairing any damaged wiring, ensuring proper connections, updating software if required, and replacing the Hybrid/EV Battery Interface Control Module 1 if deemed faulty.

8. Is it necessary to visit a dealership for repairing the U01A0 code in a 2014 Chevrolet Silverado?

- While some repairs may require specialized equipment or expertise, independent repair shops and knowledgeable DIY enthusiasts can often diagnose and repair the U01A0 code effectively.

9. Can extreme weather conditions affect the occurrence of the U01A0 code in a 2014 Chevrolet Silverado?

- Yes, extreme weather conditions such as excessive heat or cold can potentially impact the electrical connections and components associated with the Hybrid/EV system, leading to communication errors and triggering the U01A0 code.

10. How can I prevent the U01A0 code from reoccurring in my 2014 Chevrolet Silverado?

- Regular maintenance, including checking and securing wiring connections, keeping the hybrid/EV system components clean, and promptly addressing any related issues, can help prevent the U01A0 code from reoccurring.