AutoCodes – Toyota – U0151 2014 Toyota RAV4

U0151 2014 Toyota RAV4 Code - Lost Communication with Airbag ECU

Quick Answer

The Controller Area Network (CAN) is a standard bus system in vehicles that enables the connection of automotive devices without the need for a host computer. Common causes include Faulty Controller Area Network (CAN) Communication System, Faulty Airbag ECU, Airbag ECU harness is open or shorted. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means: U0151 2014 Toyota RAV4 indicates Lost Communication with Airbag ECU.
Common causes: Common causes include Faulty Controller Area Network (CAN) Communication System, Faulty Airbag ECU, Airbag ECU harness is open or shorted.
Severity: High - diagnose this code as soon as possible.
Can I drive?: Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

Save to My Repairs My Repairs

AI answers can be wrong. Verify repairs with testing. Open full chat

Code Popularity 193

How popular is this code, among other codes? Low

Repair Importance Level

Urgent (Diagnose now) (3 / 3)

Repair Difficulty Level

Advanced (Pro) (3 / 3)

What is this?

Table of contents Created and updated by William Orellana on Mar 27, 2023

Description
Possible Causes
How To Fix
Tech Notes
Cost to Diagnose
FAQs
Comments
Add Comment

💬 Need more help? Ask Coddy for instant answers — it's free!

Code U0151 2014 Toyota RAV4 Description

The Controller Area Network (CAN) is a standard bus system in vehicles that enables the connection of automotive devices without the need for a host computer. The exchange of operating information and commands among devices is facilitated by pre-programmed information about the required message exchange on the serial data circuits. Communication is carried out using two dedicated wires, known as CAN high and CAN low, with both lines carrying 2.5V when the CAN bus is in idle mode. During the transmission of data bits, the CAN high line increases to 3.75V while the CAN low drops to 1.25V, creating a 2.5V differential between the lines. Since communication relies on a voltage differential between the two bus lines, the CAN bus is NOT sensitive to inductive spikes, electrical fields, or other noise. The Diagnostic Trouble Code (DTC) sets when a periodic message from the Airbag ECU has not been received.

OBDII Code U0151 2014 Toyota RAV4 - Lost Communication with Airbag ECU - AutoCodes.com — U0151 2014 Toyota RAV4 Code - Lost Communication with Airbag ECU

What does this mean?

What are the Possible Causes of the DTC U0151 2014 Toyota RAV4?

Faulty Controller Area Network (CAN) Communication System
Faulty Airbag ECU
Airbag ECU harness is open or shorted
Airbag ECU circuit poor electrical connection

How to Fix the DTC U0151 2014 Toyota RAV4?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What does this mean?

Code Tech Notes

When there are problems with the way different systems in a vehicle communicate with each other using a technology called Controller Area Network (CAN) communication, Diagnostic Trouble Codes (DTC) are displayed. These codes can be caused by issues with the main bus or branch of the communication network, or with the Electronic Control Units (ECUs) and sensors that make up the different systems. If you see code for both the CAN communication problems and internal or power source problems at the same time, you should focus on fixing the internal or power source problems first.

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the U0151 2014 Toyota RAV4 code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the U0151 2014 Toyota RAV4 code?

Need more information on how to fix the U0151 2014 Toyota RAV4 code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the U0151 2014 Toyota RAV4 code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about U0151 2014 Toyota RAV4 Code

1. What does the OBDII code U0151 on a 2014 Toyota RAV4 mean?

The U0151 code indicates a communication problem between the vehicle's engine control module (ECM) and the airbag electronic control unit (ECU).

2. What are the common symptoms of the U0151 code in a 2014 Toyota RAV4?

Common symptoms include the airbag warning light illuminating on the dashboard, loss of communication with the airbag system, and potential issues with the vehicle's safety systems.

3. What are the possible causes of the U0151 code in a 2014 Toyota RAV4?

Possible causes of the U0151 code include damaged wiring or connectors, a faulty airbag ECU, a malfunctioning ECM, or a software issue within the vehicle's electronic control modules.

4. How can I diagnose the U0151 code in my 2014 Toyota RAV4?

Diagnosing the U0151 code may require using a professional OBDII scanner to retrieve the specific fault codes, conducting a visual inspection of wiring and connectors, and performing continuity tests to check for any electrical faults.

5. Can I still drive my 2014 Toyota RAV4 with the U0151 code present?

It is not recommended to drive the vehicle with the U0151 code active, as it may indicate a potential safety issue with the airbag system. It is best to have the issue diagnosed and repaired as soon as possible.

6. How can I repair the U0151 code in my 2014 Toyota RAV4?

Repairing the U0151 code may involve repairing or replacing damaged wiring or connectors, replacing the airbag ECU or ECM if faulty, and ensuring that all electronic control modules are communicating properly.

7. Is it safe to reset the U0151 code in my 2014 Toyota RAV4 with an OBDII scanner?

While you can reset the code with an OBDII scanner, it is important to address the underlying issue causing the code to prevent safety risks associated with the airbag system.

8. Will the U0151 code in my 2014 Toyota RAV4 cause the airbags to deploy unexpectedly?

The U0151 code itself will not cause the airbags to deploy unexpectedly. However, the code indicates a communication issue that may affect the proper functioning of the airbag system in the event of a collision.

9. How much does it cost to fix the U0151 code in a 2014 Toyota RAV4?

The cost of fixing the U0151 code can vary depending on the underlying cause of the issue. Costs may include diagnostic fees, replacement parts, and labor charges, so it's best to consult with a professional technician for an accurate estimate.

10. Can I prevent the U0151 code from reoccurring in my 2014 Toyota RAV4?

Preventive measures to avoid the U0151 code may include regular vehicle maintenance, checking for any signs of wiring damage, and addressing any warning lights or codes promptly to prevent further issues with the airbag system.