AutoCodes – Toyota – U0142 2014 Toyota RAV4

U0142 2014 Toyota RAV4 Code - Lost Communication with Body Control Module 'B'

Quick Answer

The Controller Area Network (CAN) is a standard bus system in vehicles that enables the connection of automotive devices without the need for a host computer. Common causes include Faulty Controller Area Network (CAN) Communication System, Faulty Body Control Module 'B', Body Control Module 'B' harness is open or shorted. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means: U0142 2014 Toyota RAV4 indicates Lost Communication with Body Control Module 'B'.
Common causes: Common causes include Faulty Controller Area Network (CAN) Communication System, Faulty Body Control Module 'B', Body Control Module 'B' harness is open or shorted.
Severity: High - diagnose this code as soon as possible.
Can I drive?: Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

Save to My Repairs My Repairs

AI answers can be wrong. Verify repairs with testing. Open full chat

Code Popularity 261

How popular is this code, among other codes? Low

Repair Importance Level

Urgent (Diagnose now) (3 / 3)

Repair Difficulty Level

Advanced (Pro) (3 / 3)

What is this?

Table of contents Created and updated by William Orellana on Mar 27, 2023

Description
Possible Causes
How To Fix
Tech Notes
Cost to Diagnose
FAQs
Comments
Add Comment

💬 Need more help? Ask Coddy for instant answers — it's free!

Code U0142 2014 Toyota RAV4 Description

The Controller Area Network (CAN) is a standard bus system in vehicles that enables the connection of automotive devices without the need for a host computer. The exchange of operating information and commands among devices is facilitated by pre-programmed information about the required message exchange on the serial data circuits. Communication is carried out using two dedicated wires, known as CAN high and CAN low, with both lines carrying 2.5V when the CAN bus is in idle mode. During the transmission of data bits, the CAN high line increases to 3.75V while the CAN low drops to 1.25V, creating a 2.5V differential between the lines. Since communication relies on a voltage differential between the two bus lines, the CAN bus is NOT sensitive to inductive spikes, electrical fields, or other noise. The Diagnostic Trouble Code (DTC) sets when a periodic message from the Body Control Module 'B' has not been received.

OBDII Code U0142 2014 Toyota RAV4 - Lost Communication with Body Control Module 'B' - AutoCodes.com — U0142 2014 Toyota RAV4 Code - Lost Communication with Body Control Module 'B'

What does this mean?

What are the Possible Causes of the DTC U0142 2014 Toyota RAV4?

Faulty Controller Area Network (CAN) Communication System
Faulty Body Control Module 'B'
Body Control Module 'B' harness is open or shorted
Body Control Module 'B' circuit poor electrical connection

How to Fix the DTC U0142 2014 Toyota RAV4?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What does this mean?

Code Tech Notes

When there are problems with the way different systems in a vehicle communicate with each other using a technology called Controller Area Network (CAN) communication, Diagnostic Trouble Codes (DTC) are displayed. These codes can be caused by issues with the main bus or branch of the communication network, or with the Electronic Control Units (ECUs) and sensors that make up the different systems. If you see code for both the CAN communication problems and internal or power source problems at the same time, you should focus on fixing the internal or power source problems first.

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the U0142 2014 Toyota RAV4 code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the U0142 2014 Toyota RAV4 code?

Need more information on how to fix the U0142 2014 Toyota RAV4 code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the U0142 2014 Toyota RAV4 code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about U0142 2014 Toyota RAV4 Code

1. What are common symptoms of OBDII code U0142 in a 2014 Toyota RAV4?

The common symptoms of code U0142 include issues with interior lights, power windows, door locks, and other functions controlled by the body control module.

2. What does the OBDII code U0142 indicate in a 2014 Toyota RAV4?

Code U0142 indicates a communication problem between the vehicle's onboard computer system and the body control module 'B'.

3. What are possible causes of the U0142 code in a 2014 Toyota RAV4?

Possible causes of the U0142 code include a faulty body control module, damaged wiring or connectors, a software glitch, or a communication network issue within the vehicle.

4. How can I diagnose the U0142 code in my 2014 Toyota RAV4?

Diagnosing the U0142 code typically involves using an OBDII scanner to check for other related trouble codes, inspecting the wiring and connectors for damage, and testing the body control module for proper functionality.

5. Can I still drive my 2014 Toyota RAV4 with the U0142 code present?

It is not recommended to drive your vehicle with the U0142 code present, as it may cause further damage to the electrical system or result in the loss of critical vehicle functions controlled by the body control module.

6. How can I repair the U0142 code in my 2014 Toyota RAV4?

Repairing the U0142 code may involve replacing the body control module, repairing or replacing damaged wiring, updating software if necessary, or addressing any communication network issues within the vehicle.

7. Is it safe to reset the U0142 code in my 2014 Toyota RAV4 myself?

While you can clear the code using an OBDII scanner, it is important to diagnose and repair the underlying issue causing the U0142 code to prevent it from recurring and ensure the proper functioning of your vehicle.

8. Will the U0142 code cause my 2014 Toyota RAV4 to fail an emissions test?

The U0142 code itself may not directly cause your vehicle to fail an emissions test, but it is an indication of a potential problem that should be addressed to ensure your vehicle meets emission standards.

9. How much does it cost to repair the U0142 code in a 2014 Toyota RAV4?

The cost of repairing the U0142 code can vary depending on the specific cause of the issue, the labor rates in your area, and whether you choose to repair it yourself or take it to a professional mechanic.

10. Can I prevent the U0142 code from occurring in my 2014 Toyota RAV4?

While some causes of the U0142 code may be unavoidable, regular maintenance, checking for loose or damaged wiring, and addressing any software updates recommended by the manufacturer can help prevent this code from occurring.