AutoCodes – Toyota – U0131 2014 Toyota RAV4

U0131 2014 Toyota RAV4 Code - Lost Communication with Power Steering Control Module

Quick Answer

The Controller Area Network (CAN) is a standard bus system in vehicles that enables the connection of automotive devices without the need for a host computer. Common causes include Faulty Controller Area Network (CAN) Communication System, Faulty Power Steering Control Module, Power Steering Control Module harness is open or shorted. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means: U0131 2014 Toyota RAV4 indicates Lost Communication with Power Steering Control Module.
Common causes: Common causes include Faulty Controller Area Network (CAN) Communication System, Faulty Power Steering Control Module, Power Steering Control Module harness is open or shorted.
Severity: High - diagnose this code as soon as possible.
Can I drive?: Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

Save to My Repairs My Repairs

AI answers can be wrong. Verify repairs with testing. Open full chat

Code Popularity 200

How popular is this code, among other codes? Low

Repair Importance Level

Urgent (Diagnose now) (3 / 3)

Repair Difficulty Level

Advanced (Pro) (3 / 3)

What is this?

Table of contents Created and updated by William Orellana on Mar 27, 2023

Description
Possible Causes
How To Fix
Tech Notes
Cost to Diagnose
FAQs
Comments
Add Comment

💬 Need more help? Ask Coddy for instant answers — it's free!

Code U0131 2014 Toyota RAV4 Description

The Controller Area Network (CAN) is a standard bus system in vehicles that enables the connection of automotive devices without the need for a host computer. The exchange of operating information and commands among devices is facilitated by pre-programmed information about the required message exchange on the serial data circuits. Communication is carried out using two dedicated wires, known as CAN high and CAN low, with both lines carrying 2.5V when the CAN bus is in idle mode. During the transmission of data bits, the CAN high line increases to 3.75V while the CAN low drops to 1.25V, creating a 2.5V differential between the lines. Since communication relies on a voltage differential between the two bus lines, the CAN bus is NOT sensitive to inductive spikes, electrical fields, or other noise. The Diagnostic Trouble Code (DTC) sets when a periodic message from the Power Steering Control Module has not been received.

OBDII Code U0131 2014 Toyota RAV4 - Lost Communication with Power Steering Control Module - AutoCodes.com — U0131 2014 Toyota RAV4 Code - Lost Communication with Power Steering Control Module

What does this mean?

What are the Possible Causes of the DTC U0131 2014 Toyota RAV4?

Faulty Controller Area Network (CAN) Communication System
Faulty Power Steering Control Module
Power Steering Control Module harness is open or shorted
Power Steering Control Module circuit poor electrical connection

How to Fix the DTC U0131 2014 Toyota RAV4?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What does this mean?

Code Tech Notes

When there are problems with the way different systems in a vehicle communicate with each other using a technology called Controller Area Network (CAN) communication, Diagnostic Trouble Codes (DTC) are displayed. These codes can be caused by issues with the main bus or branch of the communication network, or with the Electronic Control Units (ECUs) and sensors that make up the different systems. If you see code for both the CAN communication problems and internal or power source problems at the same time, you should focus on fixing the internal or power source problems first.

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the U0131 2014 Toyota RAV4 code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the U0131 2014 Toyota RAV4 code?

Need more information on how to fix the U0131 2014 Toyota RAV4 code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the U0131 2014 Toyota RAV4 code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about U0131 2014 Toyota RAV4 Code

1. What are the common symptoms of OBDII code U0131 in a 2014 Toyota RAV4?

The common symptoms of code U0131 include loss of power steering functionality, illuminated power steering warning light on the dashboard, and difficulty steering the vehicle.

2. What does the OBDII code U0131 indicate in a 2014 Toyota RAV4?

The U0131 code indicates a communication failure between the vehicle's onboard computer system and the power steering control module.

3. What are the possible causes of the U0131 code in a 2014 Toyota RAV4?

Possible causes of code U0131 include a faulty power steering control module, damaged wiring or connectors, a weak or dead battery, or a software glitch in the vehicle's computer system.

4. How can I diagnose the U0131 code in a 2014 Toyota RAV4?

Diagnosing the U0131 code typically involves using a diagnostic scanner to retrieve the code, checking the power steering control module for proper functioning, inspecting wiring and connectors for damage, and testing the battery voltage.

5. Is it safe to drive a 2014 Toyota RAV4 with the U0131 code?

It is not recommended to drive the vehicle with the U0131 code present as it may lead to a loss of power steering assistance, making it difficult to steer the vehicle safely.

6. Can the U0131 code in a 2014 Toyota RAV4 be repaired at home?

Repairing the U0131 code may require advanced diagnostic tools and knowledge, so it is recommended to seek professional help for accurate diagnosis and repair.

7. How much does it cost to fix the U0131 code in a 2014 Toyota RAV4?

The cost of fixing the U0131 code can vary depending on the exact cause of the issue, but it may involve replacing the power steering control module, repairing damaged wiring, or resolving battery-related problems.

8. Will disconnecting the battery reset the U0131 code in a 2014 Toyota RAV4?

Disconnecting the battery may temporarily clear the code, but it is not a permanent solution as the underlying issue causing the communication failure needs to be addressed for a lasting fix.

9. Can extreme weather conditions trigger the U0131 code in a 2014 Toyota RAV4?

Extreme weather conditions such as extreme cold or heat can potentially affect the electrical components of the power steering control module and lead to communication issues triggering the U0131 code.

10. How long does it typically take to repair the U0131 code in a 2014 Toyota RAV4?

The repair time for the U0131 code can vary depending on the complexity of the issue and the availability of parts. It is advisable to consult a professional technician for an accurate estimate of the repair duration.